• SN74LVC1G08: Reliability Qualification Report of SN74LVC1G08DCKR

  

  Lillian Liu(SH)

  TI Thinks Resolved

  Part Number: SN74LVC1G08 Hi team, Can you provide the Reliability Qualification Report of SN74LVC1G08DCKR? Such as the following. Thanks Best regards Lillian Liu

  • 4 months ago
  • Logic
  • Logic forum

• SN74LVC1G08: Does this has clamping diode?

  

  ArTzy

  TI Thinks Resolved

  Part Number: SN74LVC1G08 Hi Expert, We have design question about SN74LVC1G08DCKR need your help to check with R&D. Does each pin exist IC clamping diode? Especially pin4 output pin. If unpowered to measure pin4 and pin1 voltage, what value will be…

  • 4 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G08: VCC and signal voltage level of SN74LVC1G08

  

  Jerome Shin

  Resolved

  Part Number: SN74LVC1G08 I’d like to ask a quick question about signal input voltage level of SN74LVC1G08. Designer is using VCC 3.3V, and they are considering 5V level of A/B port signal under the VCC condition. Would you let me know if there are…

  • Resolved

  • 8 months ago
  • Logic
  • Logic forum

• SN74LVC1G08-Q1: Clamping diodes for input protection

  

  Andrea D'Amaro

  TI Thinks Resolved

  Part Number: SN74LVC1G08-Q1 Hi, does SN74LVC1G08-Q1 have clamping diodes for protection of INA and INB pins? Thanks, Regards, Andrea

  • 5 months ago
  • Logic
  • Logic forum

• SN74LVC1G08-Q1: Y output current limit

  

  Meng Liu

  TI Thinks Resolved

  Part Number: SN74LVC1G08-Q1 Hi Expert My customer use case as below： pin1 always =5V（Pin1 connect to VCC） Pin 2 normally is float and triggered low voltage when system fault. Y connect 3.3V voltage that normally current is limit 100mA. when Pin2 tie to…

  • 5 months ago
  • Logic
  • Logic forum
Answered

• SN74LVC1G08: Replacement solution to NC7SZ08P5X and NL17SZ08DFT2G

  

  Ella KIM

  Resolved

  Part Number: SN74LVC1G08 Hi Logic Folk, I'm looking for P2P replaceable part for NC7SZ08P5X and NL17SZ08DFT2G. I found several P2P parts but I'm not sure if their spec is also equivalent. Can you help suggest the most suitable part? My customer…

  • Resolved

  • 6 months ago
  • Logic
  • Logic forum

• SN74LVC1G08-Q1: Part CTE and PCB CTE

  

  Amy Lee

  TI Thinks Resolved

  Part Number: SN74LVC1G08-Q1 Hello TI team, please help to check the CTE information. thanks. Part CTE PCB CTE SN74LVC1G08QDCKRQ1 X Y Z 　 　 　 　

  • 7 months ago
  • Logic
  • Logic forum

• SN74LVC1G08: Need few information about the part mentioned

  

  bhuvaneswari r

  TI Thinks Resolved

  Part Number: SN74LVC1G08 Hi sir, This is Bhuvaneswari from Zettaone Technology, I need to know few details for the part SN74LVC1G08DCKR Parts are currently active in the website, may i know how long it will be in production? Is there any EOL issued for…

  • 7 months ago
  • Logic
  • Logic forum

• SN74LVC1G08: Need few information about the part mentioned

  

  bhuvaneswari r

  TI Thinks Resolved

  Part Number: SN74LVC1G08 Hi, Currently SN74LVC1G08DCKR part is active, may I know how long it will be supported? Is there any for EOL? Can you suggest me few alternates for this part?

  • 7 months ago
  • Logic
  • Logic forum

• SN74LVC1G08: Input transition rise or fall rate requirment

  

  Fanbin Meng

  TI Thinks Resolved

  Part Number: SN74LVC1G08 Other Parts Discussed in Thread: SN74AUP1G08 , SN74AHC1G08 , SN74LVC1G97 Hi Team, I notice this part have the minimum slew rate for the input signal. My Question is: 1. why we have this kind of requirement? what architechture we…

  • 8 months ago
  • Logic
  • Logic forum

Didn't find what you are looking for? Post a new question.