Part Number: SN74LVC1G3157-Q1 Hi team,
My customer is using SN74LVC1G3157-Q1. They pulled up the I/O pin to 3.3V by 100kohm and, the 3.3V is ramped up 53ms earlier than VCC.
During this period, the I/O voltage was 0.7V so the current seems 26uA. …
Part Number: SN74LVC1G3157-Q1 Other Parts Discussed in Thread: TS5A3159-Q1 i am performing SI simulation for the SPI interface and the SN74LVC1G3157-Q1 is part of the SPI MISO signal lines and therefore require a model (IBIS/S-parameter) of the SPDT device…
Part Number: SN74LVC1G3157-Q1 Dear team,
Please help to confirm the following configuration is ok?
VCC=3.3V,
S=3.3V I/O
A=1.8V INPUT I/O
B1/B2= 1.8V OUTPUT
Or if need VCC and S are both 1.8V ?
Thanks & Best Regards,
Sherry
Part Number: SN74LVC1G3157-Q1 To whom it may concern,
Do you have any plans to discontinue 1P1G3157QDBVRQ1 or change 4M in the near future? (Within 6 months) We will be used for new designs.
Best regards,
Part Number: SN74LVC1G3157-Q1 Other Parts Discussed in Thread: TMUX1237
Let me consult you about spec of switch product (74LVC1G3157-Q1)
When Vcc=5V & VI=5V with I≒0mA, does the output(S) reach to approx.5V? (Is it rail output?)
The VIH=VCC ×…
Part Number: SN74LVC1G3157-Q1 Other Parts Discussed in Thread: SN74LVC1G3157 , SN74CBTLV1G125-Q1 Dear Sir
My project will use TI SN74LVC1G3157-Q1. It maybe run 1KK PCS/Y.
But there are some questions which i can not found in the datasheet.
1,It…
Part Number: SN74LVC1G3157-Q1 Other Parts Discussed in Thread: TS5A22362 , SN74LVC1G3157 , TS5A3357 Dear team,
My customer is doing an infotainment project. Noe she has an switch demand support CVBS signal. And I recommend SN74LVC1G3157-Q1 to her. And…
Part Number: TMUX1219 Other Parts Discussed in Thread: SN74LVC1G3157-Q1 , Tool/software: Hi,
I looking for alternative to SN74LVC1G3157-Q1 due to I can't guarantee "Input transition rise or fall rate" dt/dv<20nS/V.
Please advise if TMUX1219 isn't…
Part Number: SN74LVC1G3157-Q1 Other Parts Discussed in Thread: SN74LVC1G3157 , Hi; Team;
I have an inquiry about the rating of “Bn” pins from customer
The absolute maximum rating of them is specified as -0.3v to VCC+0.5V(max=5.5v) at parameter named…
