Part Number: SN74LVC2G08-Q1 Dear TI team,
We will receive material SN74LVC2G08QDCURQ1 from brooker R&A, they sent Authenticity test report which is bellow.
Can you check report and confirm a uthenticity of label and batch from the report?
RATR2025102431…
Part Number: SN74LVC2G08-Q1 Hi ,
I am validating the part SN74LVC2G08-Q1 for one of our project applications and I have a doubt regarding the supply current mentioned in the datasheet. How should the current be measured?
Also i am a bit confused with…
Part Number: SN74LVC2G08-Q1 Hi ,
What is the variation of IVCC with respect to temperature?
I find that I_VCC is 4uA at -40 deg and at 25 deg it is around 53uA.
Is my measurement correct?
Part Number: SN74LVC2G08-Q1
Hi ,
We are using SN74LVC2G08-Q1 in our project application and I am trying to measure the high level and low level input thresholds. I am observing that VIH= 1.671V which is lesser than the minimum value (2V…
Part Number: SN74LVC2G08-Q1 Hi ,
I am using SN74LVC2G08-Q1 in my project application and I while validation I find some discrepancy in the output waveform. I have provided IN1 = 3.3V and have provided a triangular waveform with 10kHz at IN2. We can…
Part Number: SN74LVC2G08-Q1 Other Parts Discussed in Thread: TLV9032-Q1 I am looking for pin drop replacement for my existing part 74HC2G08DC-Q100 (NEXPERIA) in one of my design. At present i am using it for just driving transistor base with 100k and…
Part Number: SN74LVC2G08-Q1 Hi ,
We are using SN74LVC2G08QDCURQ1 in our project application.
I tried measuring input leakage current of the device at 25 deg and it was around 8.6 uA, while at -40 deg it is 300uA.
Is there any relation between input…
Part Number: SN74LVC2G08-Q1 Hello
According to the following information , the SN74VCG08QCURQ1 is preview ,and is the PCLV2G08QDCURQ1 as same as SN74VCG08QCURQ1? I need a Dual 2-Input Positive-AND Gate used in the automotive industry, temperation range…
Part Number: SN74LVC1G08-Q1 Other Parts Discussed in Thread: SN74LVC1G17-Q1 , SN74LVC2G08-Q1 Tool/software: Hi,
I am giving VCC 1.8V and my output is consuming around 4mA. So, what is VOL maximum I should consider?
My VIL level is maximum 0.3V so…
