• SN74LVC827A: Support to Identify date code for SN74LVC827ADGVR

  

  Saravanan Babu

  TI Thinks Resolved

  Part Number: SN74LVC827A Hello The top side marking of Part # SN74LVC827ADGVR is shown below. We want to know the date code. Please help.

  • over 7 years ago
  • Logic
  • Logic forum

• RE: Level Translator reccomendation

  

  Clemens Ladisch

  For translating to a lower voltage, you can use any buffer with overvoltage-tolerant inputs, such as the SN74LVC827A. What speed do you need?

  • over 3 years ago
  • Logic
  • Logic forum

• SN74LVC16T245: Data rate questions - FPGA 2.5V to 1.8V translation

  

  Dima Grinko

  TI Thinks Resolved

  Part Number: SN74LVC16T245 Other Parts Discussed in Thread: SN74LVC827A , SN74AUC16244 , SN74AUC244 , SN74AUCH16244 , SN74AUCH244 My customer request to translate 10 bits from 2.5V FPGA to 1.8V, I suggest the SN74LVC16T245 due to >100Mbps data rate, assuming…

  • over 3 years ago
  • Logic
  • Logic forum

• Need a faster 10-bit tri-state buffer than SN74LVC827A

  

  John Randolph

  We've got a situation in our current project where we're using the SN74LC827a to implement a mux to switch between two eight-bit BT-656 video sources, and it seems that we've painted ourselves into a corner and the parts just aren't fast enough…

  • over 15 years ago
  • Logic
  • Logic forum

• RE: How to achieve the highest drive current at the output of the buffer

  

  Emrys Maier

  Hi Divya, Have you considered using a single SN74LVC1G34 (or SN74LVC1G125 if you need the OE pin) instead of the parallelled channels of the SN74LVC827A? The SN74LVC1G34 is rated for much higher output current and will drive heavier loads without adding…

  • over 7 years ago
  • Switches & multiplexers
  • Switches & multiplexers forum

• RE: TXB0102 output oscillates at 40MHz - TX/RX 3.3V/5V level shifter

  

  Clemens Ladisch

  The following devices have TTL inputs, for up translation: LVxT AHCT 1x SN74LV1T34, SN74LV1T125 SN74AHCT1G125 4x SN74LV4T125 SN74AHCT125 6x SN74AHCT367 8x SN74AHCT541 16x SN74AHCT16244, SN74AHCT16541 The following devices have 5V-tolerant…

  • over 8 years ago
  • Logic
  • Logic forum
Answered

• RE: TLV320AIC34 and TLV320AIC3105 queries

  

  Elvin Joy Serrao

  Resolved

  Hi, Please find below the block diagram of digital mic connections to AIC34 codec. We have used 10-bit buffer/driver from TI, PN: SN74LVC827A.

  • over 11 years ago
  • Audio
  • Audio forum

Didn't find what you are looking for? Post a new question.