Robin,
For driving larger capactive loads, I would consider replacing the TXB0108 with SN74AVC8T245 or SN74LVC8T245. Keep in mind that would need to configure the DIR pins since the AVC/LVC family of traslators do not support auto-direction sensing…
Jenitt,
I do not think that the TXB0108 or the TXS0108E can properly drive a LED.
Most LEDs require several mA worth of forward current. The TXB0108 and TXS0108E are intended to drive high-impedance (i.e. very low current) loads. The datasheet specifies…
Hey Tom,
Yes, unfortunately, we do not currently have an 8 bit transceiver that fits this exact pinout and is 125C capable.
Our best options are goning to be the SN74AVC8T245-Q1 and SN74LVC8T245-Q1
www.ti.com/.../sn74avc8t245-q1
www.ti.com/..…
Hi Abhi,
In terms of the operation, this device is application specific to MMC. But, we understand that there are various requirements as the standards evolve.
I have attached a ppt which could be useful for us and hopefully for you to evaluate the…
Part Number: LSF0108-Q1 Other Parts Discussed in Thread: SN74AVC8T245-Q1 , SN74LVC8T245-EP Hi
I am planning to use LSF0108-Q1 for my Automotive application.This part is used for UART translation
Does the part need pull up or pull down resistor on…
Dear Sir,
But in your websiite in the following location it is mentioned that these level translator SN74LVC8T245 can support upto 500 Mbps
http://www.ti.com/product/sn74lvc8t245
How to find the Max data transfer rate from the datasheet.
Regards…
Other Parts Discussed in Thread: SN74LVC8T245 , SN74AVC8T245 , SN74AVC16T245 do we have level shifterdedicated for NAND FLASH (to use with NAND FLASH 3V, AND CPU 1.8V),or need std level shifter like SN74LVC8T245?
Hi, Elsalvador
For TXB0108, when you used it, you need to be careful for the pull up or pull down resistor adding, pull up or pull down resistor should be larger than 60kohms, based on the checking the datasheet of ULN2003, there are several pull down…
Other Parts Discussed in Thread: TXB0108 , SN74LVC8T245 , SN74AVC8T245 I was looking at the TXB0108 + the SN74LVC8T245 to use between 1.2V / 1.5V / 1.8V / 2.5V / 3.3V devices and 5V interface. These devices will be used at the connector and the cards…
