Part Number: SN74TVC3306 I am using the SN74TVC3306 part in a design for the past few years and all of a sudden I am seeing field failures where the pins no longer go to the rails. The part is used as a simple I2C buffer from a AM335x CPU to a LM75AD…
Part Number: SN74TVC3306 Other Parts Discussed in Thread: SN74AUP2G125 Hi, team,
My customer needs to improve the signal rising slew rate, they set VDPU=3.3V and use a 4.7k resistor pull up the all the B port.
In datasheet, the pull-up resistor is marked…
Part Number: SN74TVC3306 Hi, team,
Just need to confirm with you is there any risk if we use SN74TVC3306 as a 3.3V<->3.3V bidirectional I2C switch?
Thanks.
Johnny
Hi,
We are closing this post due to inactivity. Please feel free to post again if you have any other questions. We now have a goal of responding within 24 hours to any new post.
Regards,
Emrys
Hi,
We are closing this post due to inactivity. Please feel free to post again if you have any other questions. We now have a goal of responding within 24 hours to any new post.
Regards,
Emrys
Other Parts Discussed in Thread: SN74TVC3306 I am trying to simulate the circuit which contains "sn74tvc3306" I am using TINA-TI9. I downloaded the lib and ibis files, but could not do much with that. In one of the post, I read that, I would rather need…
Part Number: SN74TVC3010 Other Parts Discussed in Thread: SN74TVC3306 Dear support,
I need supports regarding IBIS model for the SN74TVC3010. I would be grateful if you could respond.
Mikami
Other Parts Discussed in Thread: SN74TVC3306 Customer, Raytheon asking the question below
LGC, Email Technical Support, , SN74TVC3306 request clarification of operating circuit. the app notes show strong pull-ups on the higher voltage bus side (150 ohms…
Other Parts Discussed in Thread: TMUX1511 , SN74TVC3306 , SN74AUC2G66 We need 1:1 switch to control the on/off of the SVID signal. The signal level is 1 V and the frequency is 25 MHz.
The table below shows the detailed spec of this signal.
Filtering…
Part Number: SN74GTL2014 Other Parts Discussed in Thread: SN74TVC3306 , , SN74AVCH2T45 , LSF0102 Hello Team,
My customer uses SN74GTL2014 for 1.05V to 3.3V level shift, but this find the part size is too big, they can't use it on their board. I also check…