I don't think JLINK is supported for TM4C129. A special JTAG debugger is used for TM4C129. Which is called: In-Circuit Debug Interface
https://www.ti.com/tool/STELLARIS_ICDI_DRIVERS
Hi Kuno-san,
Thank you for sending the document. I'm trying to update firmware using the document as a reference.
However I'm not doing well at "6.3. Programming the Board (update with new Programming tool)".
I have downloaded "stellaris_icdi_drivers…
Hi,
I tried to load a simple program on EK-TM4C1294XL LaunchPad as well as DK-TM4C129X EVM on a Windows 11 machine and there is no issue. See below image. The easiest way for you to test is to plug in your LaunchPad to your Windows 11 machine. If it…
Part Number: EK-TM4C123GXL We had one time in class like 10 students have these 2 problems:
cannot flash to the TI board https://e2e.ti.com/support/microcontrollers/arm-based-microcontrollers-group/arm-based-microcontrollers/f/arm-based-microcontrollers…
Hi,
First of all, the EK-TM4C123GXL board comes with a on-board debug probe called ICDI. If you plug in the cable you should see Stellaris In-Circuit Debug Interface enumerated. Make sure your Windows can find the drivers. Normally, Windows should find…
Hello Vivian,
Before a replacement can be issued, please have them do the following:
1) Download these drivers onto the PC being used: https://www.ti.com/tool/STELLARIS_ICDI_DRIVERS
2) Open Device Manager in Windows and look if the Stellaris In…
Hello Malav,
Have you tried installing the drivers from https://www.ti.com/tool/STELLARIS_ICDI_DRIVERS ?
If so, how are you trying to do the installation?
Best Regards,
Ralph Jacobi
Hello Marvin,
Have they installed the ICDI drivers? https://www.ti.com/tool/STELLARIS_ICDI_DRIVERS
Was this an out of the box LaunchPad or one that was programmed by them? If the latter, have they tried to Unlock the device via the steps outlined…
The method is sound. It looks like a driver installation problem. You should see "Stellaris Device Firmware Upgrade".
https://www.ti.com/tool/STELLARIS_ICDI_DRIVERS
