Other Parts Discussed in Thread: DRV8301 , LM3S818 Hello All,
I'm using the base board DRV8301-HC-EVM RevC with the contolCARD MDL-LM4F211CNCD based on the Stellaris LM4F211H5QR.
Actually, I'm trying to set the GPIO pin PD3 of the MCU and the EN_GATE…
Milan,
Thank you for your answer.
Which evaluation board do you suggest me, DK-LM4F-DRV8312 or DRV8301-HC-C2-KIT ?
With DK-LM4F-DRV8312 :
1) I will be able to test LM4F and DRV8312. But I don't know If my conclusions with DRV8312, should be the…
I had thought that we had just taken this file as is from TivaWare so we went back and took a look at the files in TivaWare and StellarisWare and both have the identical license block as what is in the file in CCS. Can you send me the file that you have…
Hi Chris,
thanks for the feedback: I just want to clarify step 2:
the SW for the controlCARD MDL-LM3S818CNCD can be generated by using the DRV8312 SW modified according the DRV8302-HC-C2-KIT SW, correct? Both of these are available for download…
I tried inserting a PDF file of the schematic below but it didn't work. How do I attach a PDF file?
The chip is used in a UV meter that OAI manufactures.
0306-152-01H.pdf
Part Number: TMS320F28054F
I'm struggling to get the eCAN module working for my custom board. The board is an electronic speed controller, and I want to be able to transmit signals relating to current/voltage/temperature, as well as receive signals…
Other Parts Discussed in Thread: DRV8301 Tool/software: Code Composer Studio
I AM GETTING THIS ERROR
Description Resource Path Location Type #1965 cannot open source file "sw/modules/math/src/32b/math.h" main.c /TRY line 2 C/C++ Problem
HERE COMPLETE…
Other Parts Discussed in Thread: C2000WARE Tool/software: Code Composer Studio Hello,
I want to use c2000 F28069M ECAN to connect a can bus transceiver with Arduino DUE.
For hardware part, transceiver TX/RX pin connect with each DUE TX/RX pin, CANH…
Part Number: TPS61183 Now our customer is using TPS61183 as backlight driver for 15.6 notebook.
One of the boards could not work.
I have checked, VIN=12V, VOUT=12V, which means, the boost doesn't work. (The right VOUT should be 28V)
I have checked…
Part Number: ADS127L01 Hi Team,
The currently project uses the 2 CH line to connect to the IEPE sensor (model: 780B), and the wire material is used(as attached).
we would like to know how length the wire can be?
Can ADS127L01 still receive signals…
