Part Number: TAC5112 This question is closely linked to https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1588417/tac5112-is-the-pll-adjustable/6177621. If we have a TAC5112 running as I2S/TDM target/slave: How large perturbations can be accepted…
Part Number: TAC5112 Hi, I'm trying to evaluate the TAC5112 for a battery-operated product I'm developing. On page 42 of the TAC5112 datasheet, a diagram is shown (Figure 7-23) that seems to imply that OUT2M can be used to sense the voltage of OUT1M when…
Part Number: TAC5112
This discussion continues from: https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1588417/tac5112-is-the-pll-adjustable/6177621 If the TAC5112 is configured as I2S/TDM controller/master. How large changes can be done to…
Part Number: TAC5112 Hi,
As disscused here " https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1617765/tlv320aic3268-two-i2s-audio-merging-to-provide-single-i2s-audio-output/6241248 "
We are using TAC5112 for merging analog & digital audio…
Part Number: TAC5112 I’m working with TDM audio on an STM32U5 interfacing with a TAC5112 codec. The signal chain is:
TDM input → deinterleave → DSP processing → reinterleave → codec output
Audio output is clean as long as I pass samples through unchanged…
Part Number: TAC5112 Hello
I have the ADC path working on TAC5112 while configuring over SPI from our MCU (so not relying on the EV kit) as this previous query: TAC5112: Configure for wclk/bclk generation from non standard Mclk - Audio forum - Audio…
Part Number: TAC5112 Hello,
We're putting a TAC5112 in a design - when the CPU goes to sleep 3V3 IOVDD will currently switch off but AVDD will remain powered at 3V3 - will this cause any power consumption issues? Kind regards,
Dave
Part Number: TAC5112 We are using the TAC5112 Codec.
Now we want to use the VAD to detect voice on ADC channel 1.
We have tested with Eval-Board. VAD is working and the Interrupt is high, when voice is recognized.
The Problem now is, when I enable…
Part Number: TAC5112 I would like to use the daisy chain feature of the TAC5112/5212 to connect two devices plus one together such that I can access the ADCs and DACs of all of the devices over one TDM bus with 4 signals - BCLK, FSYNC, DIN, and DOUT.…
Part Number: TAC5112 Hello,
I am working with the TAC5112EVM-K eval kit and measuring I2S -> Analog Out latency at different sample rates and interpolation filter settings. I see clear differences between linear phase, low latency, and ultra-low latency…
