Part Number: TAS2505-Q1EVM Dear Sir,
When I adjusted the EQ of TAS2505-Q1EVM, I had setted the Fs as 48KHz, the resolution as 24bits by TIBQ and setted the high pass frequency as 15KHz.I put this code in "command buffer" , but the sound doesn't change…
Part Number: TAS2505-Q1EVM Other Parts Discussed in Thread: TAS2505-Q1 , TIDA-01529 , TAS2505EVM Hi Team,
My application of TAS2505-Q1 is to be an I2S slave without MCLK. According to the suggestion of the manual, the clock parameters are:
BCLK = 1.536MHz…
Part Number: TAS2505-Q1EVM Other Parts Discussed in Thread: TAS2505 Hi,
One of my customer purchased TAS2505-Q1EVM and is facing issues in getting the signal output.
Customer is trying to route the AIN signal to speaker output. A mono audio is provided…
Part Number: TAS2505-Q1EVM Other Parts Discussed in Thread: TAS2505-Q1 Hi Team,
One of my customer's is working on TAS2505-Q1 EVM. They started with powering up the EVM from external 5V. They are using external on board LDO's for AVDD and DVDD…
Part Number: TAS2505EVM Other Parts Discussed in Thread: TAS2505 , TAS2505-Q1EVM Hello team,
My customer found IOVDD issue previously discussed in this thread still remains on TAS2505EVM which was recently shipped.
My customer sees +2.45V IOVDD when +1…
Hi Carolina,
Thanks for your help. Just for completeness I am posting some quick check info you provided me:
Power Supply:
The TAS2505 EVM can be powered externally using a 5V supply or the USB.
Default Jumper Settings:
The jumper settings the EVM comes…
Part Number: TAS2505 Other Parts Discussed in Thread: , , TCA9544A Dear TI-Team, I own the Evaluation Modules TAS2505EVM and TAS2505-Q1EVM. Both audio-chips supports LeftJ, RightJ, I2S and DSP-Modes. I'm wondering if it is possible to use one 24bit slot…
Hi, Nick,
The BCLK and the DAC processing blocks are always associated for the beginning and the end of the internal activity. Generally, the processing blocks require of at least 8 BCLK pulses in order to start its digital processing. Similarly, these…
Part Number: TAS2505-Q1 Hello,
I am trying to make my TAS2505-Q1EVM play two sounds, a square wave at 400hz and a square wave at 1024hz. I don't want to use an audio file playing through my computer to achieve this. What way would be an alternative to…