Part Number: TAS2555YZEVM Other Parts Discussed in Thread: TAS2563 , TAS2557 Hi,
Reading through the PPC User Manual, Appendix B seems to suggest that there is an option to generate header files. I'm guessing this is in the "End System Integration" Block…
Part Number: TAS2555YZEVM Other Parts Discussed in Thread: TAS2555 , TAS2563 , TAS2557 , PCM4201 Dear support Team, What must i do to setup the TAS2555 for analog input? Apparently i cannot select this input option in the PPC3 software, so i have made some…
Part Number: TAS2555YZEVM Other Parts Discussed in Thread: TAS2555 Hello, all together in this forum, we got a Problem with the TAS2555YZEVM and PPC3 V3.1.4: Initialization of the TAS2555 in ROM Mode 1 or ROM Mode 2 works fine, but when initalizing it in…
Part Number: TAS2555 Other Parts Discussed in Thread: , PP-SALB2-EVM Hi, Support Team
I plan to demonstrate SmartAmp to my customer with TAS2555YZEVM and PPS3. Load 'AAC_DMSP1217P-J-01_v1_3.ppc3' file to TAS2555Apps of PPS3. System check is OK. But…
Part Number: TAS2555YZEVM Hello to whom it may concern
Now TAS2555EVM can't operate at PPC3. System check is OK. Next I worked at "Tuning and Audio Processing",however it can't complete "Updating components..." even after 10 minutes.…
Part Number: TAS2555YZEVM Other Parts Discussed in Thread: TAS2555 Please let me know about I2C function for TAS2555 and PPC3.
①Which default I2C ckock frequency 100kHz or 400kHz?
②Is there way to register dump file on PPC3?
③If there any detailed document…
Hi Luis,
Thanks for the reply. The sound output requirement was called out as 65dBA at 2 feet. This is attainable at less than 1 W. But we had an industry expert suggest that 6W would leave us short. I believe the 6W amp is plenty, but when an expert…
Hello Ed,
A1: Yes you are correct TAS5782 is supported by PP-SALB-EVM and nothing else is needed. The FAE you are working with has reached out to us as well and is trying to find a PP-SALB-EVM for you as well.
A2: The characterization files from PP-SALB2…
Part Number: TAS2555 Other Parts Discussed in Thread: , TAS2557 I think I will also need the Learning Board to characterize the loudspeakers. Is that correct?
What is the correct learning board to use with the TAS2555YZEVM?
Part Number: TAS2555 I am using PPC3 with LB2 connected to TAS2555YZEVM. I perform the hardware checks and do a speaker fit test. No problems. However when I run the speaker excursion test to determine Bl, I get a fit error. The displacement curve is…
