Part Number: TAS2557EVM Other Parts Discussed in Thread: TAS2557 I'm trying to either disable, or set the voltage limiter on the TAS2557EVM to 9V. I go into the Device Control page, adjust the settings as needed, the notice on top says that "Changes made…
Part Number: TAS2557 Tool/software: Hi Team,
Customer have recently procured TAS2557EVM and got access to Pure Path Console 3 also. They also have requested and downloaded TAS2557 plugin.
But facing an issue with the installation of TAS2557 App in…
Part Number: TAS2557 Other Parts Discussed in Thread: TAS2559 , Tool/software: What I would like to do is change the digital gain.
This is what I found in the forum and documentation.
I have found the "Digital Volume Control – TAS2557/TAS2559" document…
Part Number: TAS2557 We use TAS2557 + LEARNING BOARD + PPC3, want to see realtime sep & stp. in PPC3 rule,we need go to the Turning and Audio Processing page at first.
but in this page,amplifier volume force to -10dB(if use 4Ohmn speaker ,output power…
Part Number: TAS2557 Hi team,
I have a customer design in TAS2557 and have some questions about smartamp.
VBAT 5V 1.2A 4ohm 6W loudspeaker
1. What's the range of smartamp and EQ latency?
2. Do we have reference or default for the EQ setting? …
Part Number: TAS2557
Hi team,
When turn on the smart amp(Not enable EQ), the sound hear like electronic sound and it looks 2-4KHz not normal.
Enable EQ and adjust to reduce dB can inhibit electronic sound.
There are also with electronic sound…
Part Number: TAS2563 Other Parts Discussed in Thread: TAS2557 Hi,
I'm designing the TAS2563, TAS2557 or similar into a new product. The DSP's equalizer functionality is essential to make the end product work well
The product webpages are confusing…
Part Number: TAS2557 Hi Sir,
I connect TAS2557 EVM and using default GUI setting with dummy load, I measured VBST=5V. How can I let it be 8.5V?
I measured Vout=1.6Vrms only, it will always keep in 1.6V even increase gain.
It can up to 3.5Vrms if…
Part Number: TAS2557 Other Parts Discussed in Thread: TAS2555 , Hi,
Sorry for the repeated channels of inquiry.
We have a design that is going into production. It was designed around the TAS2555, but unfortunately those parts are long lead time. I…
