Hi Gan,
That's correct, I described this wrong. 8Ohm connects 8Ohm resistor only. 4Ohm only connects 4Ohm. There's no case with both in series.
Please refer to this previous post, VBAT = 4V still has THDN <0.1%: (+) TAS2562YFPEVM-DC: PWM waveform…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 , TAS2563 We are testing the TA2562 EVK. I am inputting a 1khz sine wave. An analog amplifier would pwm this signal when trying to decrease output voltage instead of trying to average…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 , PPC3-EVM-MB Hi TI members,
I've connected PPC3 with TAS2562 EVM, also configure the setting as user guides.
But TAS2562 AMP still has no sound output. Could you help to check…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2563 , TAS2562 Dear sir
How could I measure the speaker excursion in real time by PPC3?
Thx
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 Hello expert, I have question regarding TAS2562EVM. We cannot play pink noise file(.wav) with TAS2562 but other sine wave and Music file (.wav) can be played by TAS2562. Also I confirmed…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 , , PPC3-EVM-MB , PP-SALB2-EVM Hello Expert, I have questions regarding TAS2562EVM. First, where could I issue access request of TAS2562EVM's apps? I cannot found link on TAS2562 product…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 Please grant access to APP of TAS2562YFPEVM-DC and PPC3-EVM-MB board!
I have both EVMs on hand and installed the PPC3. So far, only I2C Master APP shown up.
Part Number: TAS2562YFPEVM-DC Hi Team, Our customer would like to request the drawing that shows the dimensions of the board and the locations of pin 1 of the two 40-pin connectors below:
The customer is designing a custom PCB that will plug into the TAS2562YFPEVM…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 , TAS2552 Hello,
I need to replace a TAS2552 with a TAS2562. I succeeded with the TAS2552 but not with the TAS2562.
I work on an IMX6 with a YOCTO distribution. I use the I2C driver…
Part Number: TAS2562YFPEVM-DC Other Parts Discussed in Thread: TAS2562 We have a customer that can't seem to generate boost voltages lower than 8V.Setting the boost to 7V and 6V both yield 8.2V It looks like "Boost Configure 2" isn't being set properly…
