Part Number: TAS2764EVMTAS2764EVM not showing up in list of ppc1,ppc2,ppc3 supported devices.
Should I use a program other than ppc3?
I have been struggling for a few days trying to figure out the EVM apps. Got granted for the usage of TAS2764EVM. However…
Part Number: TAS2764EVM I want to know how to check IV-SENSE, with or without speaker
I activated I-SENSE and V-SENSE in PPC3, but it is not confirmed on the I2C script and live IRQ
I used 8ohm speaker for test
Part Number: TAS2764EVM Other Parts Discussed in Thread: TAS2764 Hi
How to check TAS2764 speaker resistance, open resistance, short resistance(load diagnosis mode)
I am using TAS2764 EVM
I am reading the values of LDG_RES1~4, but it is difficult to distinguish…
Part Number: TAS2764EVM Both customer and I are experiencing low volume when testing the TAS2764EVM via the USB connection. Despite our attention to following the recommendations of the user's guide, the power we get through the 4Ω speaker is small. When…
Part Number: TAS2764EVM Other Parts Discussed in Thread: TAS2764
Hi Team,
I am using TAS2764 EVM for my work. I am using PPC3 for the device configuration and testing. While doing the same I have found that inside the Limiter headroom adjustment window…
Part Number: TAS2764EVM Hi Team,
I just want to get a clear understanding on the topic I2C Address re-detection. My understanding is that we are sampling the D4 pin (Address pin) using ADC to get the voltage level of the pin. From the voltage level we…
Ivan Salazar said: As long as MATLAB has a hardware interface to connect to the EVM it should be able to talk to it.
Do you mean an additional hardware interface board, or just a USB connection between the EVM and the computer?
Part Number: TAS2764EVM Other Parts Discussed in Thread: TAS2764 Hello Expert, I'd like check the TAS2764EVM's PPC3 Apps but I couldn't found any link for issuing access request of this. So could you provide access permission? Best regards, Kazuki…