Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 The VI-data are recorded through the USB interface on TAS2770EVM. Until recently it worked fine but now the sensed voltage signal is clipped. However, the output from the amplifier is not…
Part Number: TAS2770EVM-STEREO Other Parts Discussed in Thread: TAS2770 Hello Guys,
Good day.
Our customer is planning to buy the TAS2770EVM-STEREO. However, upon checking the user guide, he saw the note below and wanted to confirm if the fully released…
Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 Hello Concern,
I want to check the the PWM output for 1KHz input source file.
What will be output, Because i am getting fixed frequency out along with 5V amplitude as VBAT is 5V.
SBCLK to…
Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 , LM5155 Hello,
Due to there seems don't have a boost converter (5V boost to 12.6V)in TAS2770EVM.
Is there any recommend boost converter for this IC? Currently they are using SY7315
Customer…
Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 Hello Concern,
In datasheet, It is stated that 'the H-bridges in the device and the connections to the speakers as tight as possible to reduce emissions'.
But in our case Speaker…
Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 Team,
We need to drive a speaker at 1.5W and 3W using the TAS2770 EVM and the purepath console. How can this be done in the GUI?
Part Number: TAS2770EVM-STEREO Other Parts Discussed in Thread: TAS2770 I was wondering if someone could provide some insight on the correct settings in order to receive current sense and voltage sense data in Audacity, using the setup of the Pure Path…
Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 Hello Concern,
I have installed PPC3 and Connect EVM. also assign Speaker as TI Speaker.
Please find the attached Image for Jumper setting.
But not able to find the audio player in PPC3 console…
Part Number: TAS2770EVM Other Parts Discussed in Thread: TAS2770 TAS2770EVM: Purepath 3 available apps don't show when software is installed in windows. The software access was granted for gene.geyer@flex.com.
Hello Chris,
You are correct, the low pass filter is indeed an additional external circuit. The ferrite bead filter refereed in the datasheet is mainly for output EMI concerns, but any low pass with appropriate cut off frequency should work.
Regard,
Jin…