Part Number: TAS2781 Tool/software: I've been trying to get audio working properly on a Legion 9 16IRX9.
If I use the script from https://e2e.ti.com/support/audio-group/audio/f/audio-forum/1282089/tas2781-tas2781 using i2c bus 1 then just the left…
lianghaisen said: If the voltage of PVDDH is 12V, will the output volume increase?
Peak volume can be higher, yes, is there some way for you to send a test signal of 0dBFS sine tone into the device and verify the peak volume?
lianghaisen said: Is the maximum…
The /dev/tiload_node has not been created in the system.
How do I create t he /dev/tiload_node?
What should I set up?
What settings should I make in "menuconfig" or "kernel menuconfig" ?
Regards,
Je Sang
Part Number: TAS2781 Tool/software: I'm reviewing a new amp chip and I'm reviewing TAS2781
because the functionality of smart amp is attractive. It is essential that I need PPC software.
I looked at the document and the circuit configuration of…
Part Number: TAS2781 Tool/software: Hi, TAS2781 support team
The TAS2781 datasheet is mentioned on the recommended decoupling capacitance as below.
I think the following capacitance value should be a capacitance value considered the DC bias characteristics…
Part Number: TAS2781 Other Parts Discussed in Thread: TAS5825P , Hi:)
-
Just wanted to make sure if it is possible to have both the Hybrid-Pro from the TAS2781 and TAS5825P connected to each other like shown here:
In this application 2x TAS2781 and a TAS5825P…
Part Number: TAS2781 Hi team,
Customer is testing TAS2781 in their application.
And they find that the DREG pin voltage measure as below
Measurement(V)
Min
Typ
Max
1.589
1.601
1.61
Compare with our parameter table, their measured…
Part Number: TAS2781 Other Parts Discussed in Thread: TAS2563 ,
linux-firmware has stero ( tas2781RCA2) and quad (tas2781RCA4) configs.
our design is mono.
where can i get tas2781RCA1?
thank you.