Other Parts Discussed in Thread: TAS5086 Hi Engineer,
Now I'm trying to shutdown PWM_3 through PWM_6 in the 2.0 mode by setting surround register (0x19).
However I can not shutdown PWM_3 through PWM_6, on the other hand PWM_1 and PWM_2 are shutdown…
Other Parts Discussed in Thread: TAS5086 Hi,
What type of downmixing is performed in the TAS5086. Is it Lt/Rt with a gain and a phase shift applied to the surround channels or is it the Lo/Ro approach where it is a straight sum of the channels with a gain…
Part Number: TAS5132 Other Parts Discussed in Thread: TAS5086 , ALLIGATOR , Hi,
The TAS5132V2EVM board setting followed with spec sllu106a.pdf, section 3.5.
After applying the setting .cfg file TAS5132VV2EVM_BTL.cfg inside the CD
Connection to speaker can…
Other Parts Discussed in Thread: TAS5086 HI, have a board with the tas5086. I use a freescale processor to load the reg settings. I am bringing in an I2S signal (BCLK, LRCLK and SDIN) from another board and am trying to convert this to a PWM with the tas5086…
Other Parts Discussed in Thread: TAS5086 The datasheet for the TAS5086 indicates that the Master Volume Register (0x07) can be programmed to set a range of volumes down to -103dB. On our system we are finding that for any values < -79dB (register value 0xCF…
Other Parts Discussed in Thread: TAS5086 Hi,
I am using TAS5086 modulators in an application,
everything works ok, however when I pull the pwd pin ( 10) of the TAS5086 low,
nothing happens and pwm powerstages keep running. In the datasheet however
it…
Other Parts Discussed in Thread: TAS5086 Good morning. I'm trying to run the TAS5342LDDV6EVM bought from you. Both the publication "TAS5086 PurePath Digital™ AUDIO SIX - CHANNEL PWM Processor" and "Quick Start Guide for TAS5086 Based EVMS" says that the…
Other Parts Discussed in Thread: TAS5086 Hi, I've been trying to figure out what could be the easiest way of connecting the TAS5086 to the TAS5612A (in BTL mode).
When in stereo BTL mode, the TAS5612A needs four inputs (A, B, C, D).
How do I go about…
Other Parts Discussed in Thread: CC8530 , TAS5086 Hello all,
I have an application where I am using the 5086 with the CC8530. Is there any reason this should not work?
How do I go about modifying the 5518 info already in the system to relate to the 5086…
