Part Number: TAS5414C-Q1 Other Parts Discussed in Thread: TAS6754-Q1 Tool/software: Hello,TI teams,
I am gonna evaluating TAS6754-Q1 EVM.But it is not formal materials，so I have to use TAS5414C-Q1 for insteading.
I have already install the PPC3 to my…
Part Number: TAS5414C-Q1 The amp chip in question is used in the Sony MEX-XB1000BT car radio. This car radio has a problem: it turns off and resets every time the volume is turned to maximum, even if the car radio is connected directly to the 12V battery…
Part Number: TAS5414C Hi
The customer can capture the I2C Address, but after passing the front-end codec output to the tas5414c input, the tas5414c also does not output sound, but it is confirmed that the codec output has sound output.
Do I need to…
Part Number: TAS5414C Hi
One question is about TAS5414CPHD What is the usage specification of Dual Inductor in the circuit diagram? I see that there is no description in the public version circuit and BOM
Hi James,
This depends on the method of H/W mute. There may be a 18ms discharge time of the Mute Cap. Therefore, I would think this is normal.
Regards, Gregg Scott
Part Number: TAS5414C Other Parts Discussed in Thread: , TAS5414A , TPA6404-Q1 Hello,
My customer is asking about TAS5414C at PBLTL mode(mono).
1) Can TAS5414C output with following connection?
Conditions:
DC supply(PVDD)： 12V、
Speaker: load 1Ω（0.8Ω min…
Part Number: TAS5414C-Q1 # Issue: I can't R/W the SLAVE AMP (only used salve2). But MASTER R/W reg. are OK (except reg. 0x0A can't set to 0x40).
# My initial sequence:
Read from master register 0x00 => value = 0x00
Read from master register 0…
Part Number: TAS5414C Hi sir,
I have a inquiry on the Parts difference between TAS5414C-Q1 and TAS5414C.
Generally, TI automotive grade devices have -Q1 suffix.
But the datasheet for TAS5414C is also mentions it as automotive device.
I would like to know…
Part Number: TAS5414C-Q1 Other Parts Discussed in Thread: TAS5414C Hello,
My customer is inquiring about recommended power inductors for the TAS5414C. They are currently using a Sagami DBL8087H-100M-R , 10uH dual core SMD 8x8mm, but would like to know what…
Part Number: TAS5414C Other Parts Discussed in Thread: TAS5414 Hi TI experts,
My customer is designing TAS5414. Only 1EA of TAS5414 is used in the application.
How using OCS_sync pin(61pin) of TAS5414? (Floating? connected GND? or other way?)
Please check…
