Part Number: TAS5613A Hi team,
1. Customer was experienced cool sheet (Polymatech PT-V) in previous models, which was used as the material connecting the heat sink and IC. They are planning to use grease (Shin-Etsu Silicone G-777) for the next model…
Part Number: TAS5613A Hi team,
My customer have found different overcurrent behavior in different chip. Please see below waveforms to give me your thoughts about why there is difference.
And could you please teach me the detailed behavior of overcurrent…
Part Number: TAS5613A Other Parts Discussed in Thread: TAS5613 Hey there,
I use the TAS5613 as an amplifier. My problem is, that the SD Pin is LOW which means he doesnt see any failure.
But the READY Pin is not HIGH. The amplifier doesnt work either…
Update.
After inserting a heat conductive material (Gap Pad VO Soft) between the board and the metal enclosure bottom the Schottky diodes were able to work even with higher continuous audio output power (2 x 100W) without failure.
The second TAS5613A…
Other Parts Discussed in Thread: TAS5613 , TAS5613A , TAS5611A , TAS5611 Hi,
Could you please tell us the difference between TAS5613 and TAS5613A?
Best Regards, Kato
Part Number: TAS5613A Other Parts Discussed in Thread: TAS5630B , TPA3251 Hi TI,
Can you please tell me the overcurrent protection scheme used in the TAS5613A as it is not documented in the datasheet.
I want to ensure that is a current limiting…
Other Parts Discussed in Thread: TAS5613A Hi all,
According to the datasheet of TAS5613A, the Inverting voltage Gain (VOUT/VIN) is 21dB as typical value.
How much is the variation of gain as min/max?
Regards, Toshi
Other Parts Discussed in Thread: TAS5613A HI,
I am using TAS5613A power amplifier to drive audio signal (3.5KHz to 4KHz) in PBTL mode. The Load resistance will be around 9-10Ohm. I have constructed the schematics as given in the datasheet, what i noticed…
