Part Number: TAS5630B Hello,
Our customer is facing streng phenomes while power down of PVDD, before kick in UVP alert, suddenly large short-though current is running as attached waveform. At that time GVDD and VDD are keeping 12V. This problem occurred…
Part Number: TAS5630B Dear Technical Support Team,
My schematic is similar to 8.2.6 Typical Differential-Input BTL Application With BD Modulation Filters, DKD Package. The inductor multiplier is the recommended typical value of 10 uH. Everything else…
Part Number: TAS5630B 1) We cannot find a dimension-ed mechanical drawing for the DKD 44 version of this part. We need it for heatsink design purposes. Can a copy be provided please ?
2) Are there application notes available for heatsink design for…
Part Number: TAS5630B Other Parts Discussed in Thread: TPA3156D2 , TAS5630PHD2EVM , UCC27284 Tool/software: Hello
While a typical (audio) application doesn't require short propagation delays (and probably that's the reason why it's usually not provided…
Part Number: TAS5630B Other Parts Discussed in Thread: OPA1632 , TAS5630 Hello TI Team,
just built the prototype based on TAS5630B EVB schematic in Mono PBTL configuration. It is fully working fine, but I have a simple question related to output power…
Part Number: TAS5630B Other Parts Discussed in Thread: TAS5630 , Hello,
Below is the PCN information my customer received in the second half of last year.
The TAS5630PHDR,recommended replacement product, is identified by TI.com as Not Recommended…
Part Number: TAS5630B Hi TI,
we are using TAS5630B connected to a 1:4 audio transformer to make a PA amplifier with 100V output. We are seeing some failures out in the field, but are not able able to trace the reason for it. The TI part is driving the…
Part Number: TAS5630B Hello,
What is the input common voltage of the TAS5630B? I couldn't find it in datasheet, it could only require the input voltage is 5Vpp.
And the below post has described TAS5630B has constructed internal DC bias of the input…
Part Number: TAS5630B Is there a defined relationship between the DC common mode ( "Bias" ) voltage present at INPUT_A, _B, _C and _D terminals and the voltage at the VI_CM terminal ?
If there is no relationship between them, is there a specification…
