Part Number: TAS5708 Hi, Good day. Our customer is using the TAS5708 and they have a question on the error status register (0x02) They read the error status register and it returns 1 but the table shows only "-" for that column. Does that mean this bit…
Other Parts Discussed in Thread: TAS5708 , TAS5754M Hi,
I'm trying to use TAS5708 with PCM2707s I2S ourput. PCM2707 can operate at 44.1 and 48 kHz.
It seems like TAS5708 can't tell the difference between 44.1 and 48, so it will use the same bank for…
Other Parts Discussed in Thread: TAS5708 , TAS5709 , TAS5707 Hello,
I've tried to set the DRC with the following settings:
gain: 0 (O = 0.064516 = 0x00084210) threshold: -64 (T = 14.616484 = 0x074ee8f0) ratio 30:1 (k = -0.966667 = 0x03844445) attack, release…
Hi Marvin,
The TLV320ADC3101 is specified inside https://www.ti.com/tool/PUREPATH-WL-CFG since that's what the CC85XXDK(-Headset) supports in its hardware design, however the datasheet and TRM does clarify that other TI audio devices supporting serial…
Other Parts Discussed in Thread: TAS5708 Hi,
Recently, we designed an Audio amplifier based on TAS5708. They all work great when they work!
However, sometime they just die. Sometimes they die during power up, sometimes when they are play music, and sometime…
Other Parts Discussed in Thread: TAS5708 Hi,
Our customer is now evaluating TAS5708 and want to know the over current threshold because there is no its information in datasheet.
Can you please let us know the reference value of over current threshold for…
Other Parts Discussed in Thread: TAS5708 Hi,
I'm using a TAS5708 in AD mode, using only OUT_A and OUT_B tied to an 8 Ohm speaker (BTL config.). The output LC filter uses the same values as shown in the TAS5708 EVM (SLOU232A). According to the data sheet…
Other Parts Discussed in Thread: TAS5708 I’m using a TI TAS5708 to drive one speaker on OUT_A and OUT_B (BTL configuration). Since I’m not using the second output (OUT_C and OUT_D) can I disconnect or float PVCC_C and PVCC_D? Will I still need…
Other Parts Discussed in Thread: TAS5709 , TAS5708
1. Refer to TAS5708 spec, page 14, figure 13. The doted line indicates we can achieve higher power with increase of heat sinking. Do you have details or guideline on where to add the heatsink?. Can the…
Other Parts Discussed in Thread: TAS5709A , TAS5708 , TAS5760M Hello,
I am trying to decide if TAS5708 (closed loop) or TAS5709A (open loop) would be better fro my application. I do not need all the frills of the 5709A, but wonder if there is any downside…