Part Number: TAS5709A Dear TI expert,
We have a 2.0 BT speaker product which deploys TAS5709A for audio power stage. We conducted EMC check on the product and noticed that it failed at 400MHz check point. Would you please kindly advice how we can improvement…
Hi, Andrew
If EQ setting is possible in Power AMP, I would like to use only Power AMP.
It is difficult to apply the recommended part (TAS2781) because it is a mono product.
The Speaker AMP I found has the following parts.
-TAS5751M *2
-TAS5709A*2
-TAS5711…
Part Number: TAS5751M Other Parts Discussed in Thread: TAS5805M , TAS5825M Hi, TI support team
I am trying to configure a 2.1ch speaker AMP.
The prerequisites for configuration are as follows.
- 2.1ch Audio out
- 20W per channel
- EQ setting for each channel…
Other Parts Discussed in Thread: TAS5709A , TAS5708 , TAS5760M Hello,
I am trying to decide if TAS5708 (closed loop) or TAS5709A (open loop) would be better fro my application. I do not need all the frills of the 5709A, but wonder if there is any downside…
Other Parts Discussed in Thread: TAS5709A , TAS5715 , TAS5558 , TAS5548 , TAS5508C , TAS5709 Hi, I need some help, I am needing to find a way to communicate to the TAS5709A and tas5715/TAS5709a with a pc so I can work with the TAS Gui Software so I can ellaborate…
Hi, Dan,
We have another part, TAS5709A, which has two different addresses, so we can get you up to 4 total.
However, past that, you'll need an I2C address decoder. Look at something like PCA9543A or PCA9518
-d2