Part Number: TAS5711 Other Parts Discussed in Thread: TAS5805 , Tool/software: What EVM should i use to work on TDS5711 since the EVM is no longer available
Part Number: TAS5711 Tool/software: Hi,
We're trying to use TAS5711 with a platform over MI2S interface. We've being able to supply LRCLK, SCLK & SDIN to the TAS5711 chip but we do not have audio playback working.
The data sheet says: "The clock section…
Part Number: TAS5711 Tool/software: What is the formula to calculate power at a speaker in both BTL & SE configurations?
Let's assume an 8 ohm speaker load. (RL = 8)
My understanding in BTL mode is that the voltage at the speaker is essentially doubled…
Part Number: TAS5711 Hi Team,
Could you help review TAS5711 schematic?
TAS5711_WIFI_SPEAKER.pdf I already have boards and they work. But they can be changed, so i am happy about all your feedback. I have one problem:
When the Voltage is over 12v…
Part Number: TAS5711
Hi Team,
our customer wants to use the TAS5711 and wants to modify the overcurrent limit.D/S explains the mechanism on page 24 + some electrical specs on page 9.
-> However no details how to calculate ROCP.
Do you have some…
Part Number: TAS5711 Hi Team,
our customer wants to use the TAS5711 in their design and has a question about the UVLO:
The d/s only states the typical value of V_UVP, see
In their system, the device is used at nominal 8V, so some concerns…
Part Number: TAS5711 Dears,
Could you help review TAS5711 schematic?
WB-507-TI5711.pdf
Our customer already have boards that can load at 2x15W. But Overtemperature protection of the chip is triggered after half an hour of operation.
I am happy…
Part Number: TAS5711 Other Parts Discussed in Thread: TAS5805
Hi Sir,
My customer would like design TAS5711. however, there is pop noise on the system
so customer uses EVM to duplicate the pop noise.
While using TAS5711 EVM board, the pop noise…
