Part Number: TAS5713 Hi team,
One of our customer's issues, could you please provide some troubleshooting suggestions
I am trying to program the DRC on the TAS5713.
The documentation says the threshold is in 9.23 format and the other coefficients…
Part Number: TAS5713 Hi
My KMM customer use TAS5713 and meet the audio output is not stable. sometime is no output.
so they found the register 0x02(ERROR STATUS REGISTER)，value is 0x40 (PLL autolock error).
any comment for this issue?
Below is…
Part Number: TAS5713 I have a customer looking to use the TAS5713. They likely want to set up multiple equalizer settings. Please let me know if there is an easier way to program this part as opposed to generating many header files and putting all this…
Hi Steve,
TAS5713 has been already very widely used in the market, and we never heard of DRC issue. Adam will help to explain your concern soon later.
Best regards,
Shawn Zheng
Part Number: TAS5713 Other Parts Discussed in Thread: TAS5733L , A few questions I'd like to be sure of...
1. The datasheet specifies registers 40 and 43 as 8 bytes. However, the GUI tool generates 4-byte values for these locations. I'm unsure why it…
Part Number: TAS5713 HI
We are using TAS5713 DRC function and encountered a problem that left channel we can successful limit the output power at 27W however right channel the DRC fail to limit the output power.
My registor setting as below, may i…
Part Number: TAS5713 Hi,
I don't know if someone can help me.
I am trying to create an alarmclock on a SBC, a Bananapro (equivalent to a Raspberry Pie). I created my own PCB (VCC=18V, AVSS,AVDD=3.3V):
Whenever I tried to unmute my TAS5713, i…
Hello Thuan,
I have the same problem you had: no sound even though the I2S signals are good and I get 0x50 as the device id instead of 0x43.
I also noticed that the system control register 1 is at 0xa0 instead of its 0xb0 reset value (the difference…
