Part Number: TAS5731 Hi TI Team:
When my customer debugging the DEMO board found there are some problems on the output mode Settings, They want to set a SE output mode, but when set to manual register configuration parameter is different, when 0x05 register…
Part Number: TAS5731 Team,
For TAS5731, can we increase the external PLL filter capacitor C1 from 47nF to 4.7uF? Is there any side effect? Customer factory made a mistake to solder 4.7uF to the board.
Regards,
Nic
Part Number: TAS5731M Other Parts Discussed in Thread: TAS5731 Tool/software: TI C/C++ Compiler Some of the products shipped burn out the woofer.
Could you tell me what's the reason the woofer burn out？
Is it related to the register-setting of the TAS5731…
Part Number: TAS5731 I use pic-1 memory tool read the register, get the pic-2,
when i use pic-3 export the config, get the pic-4,
there are many difference between pic-2 & pic-4,
Please help give some suggest? thanks!
Part Number: TAS5731 Other Parts Discussed in Thread: TAS5711 , TAS5825M , TAS5805M Hello,
New to hardware DSP development, but I work with some very smart and capable engineers. Here's where I'm at: We are creating a product featuring TAS5731 I…
Part Number: TAS5731 Hello,
In the TAS5731 datasheet, there are many registers which named like u[31:26], b0[25:0].etc, take 0X29 or 0X2A for example.
I'd like to know what does the u[31:26] mean? I didn't find any description about it, please give…
Part Number: TAS5731 Hi，our customer use TAS5731 design as 8W audio under the module of PBTL，however，we cannot find any Correlation graph of PBTL，only there is BTL and SE Correlation graph in the datasheet，by the way，we can find the Correlation graph of…
Part Number: TAS5731 Hi Sirs, The TAS5731M datasheet specified the 0x25 must be written to 0x01 10 32 45, however, we found that we need to write 0x25 = 0x01 01 23 45 to enable PBTL mode on the EVM. Would you pls advise if we should add 0x25 = 0x01 01…
Part Number: TAS5731EVM
Hi Team, Cusotmer is asking for the TAS5731 EVM OTP output power under the following the conditions. I do not have the EVM on hand. Would you please let us know what the OTP result is? (even the THD is >10%)
1) For 1.0 PBTL 24V…
Part Number: TAS5731 Sorry to bother.
As title, customer want to get some suggest about output voltage or PVDD when TAS 5731 used at 10W x 2 condition.
For example, output voltage or PVDD higher than ?V is better when 10W x2 output.
