Part Number: TAS5805MEVM Other Parts Discussed in Thread: TAS5825M , TAS5805M Hi TI members,
i faced an issue. This morning i still use a EVK for tuning. The external power connector is a bit loose. So, i adjust a few times and the evk on off a few…
Part Number: TAS5805MEVM Other Parts Discussed in Thread: TAS5805M , TAS5805 Hi Sir
We neet to estimate TAS5805M EVM.
we met some problems on that, we would like to measure the efficiency of TAS5805M, but when we gave -15 dB on I2S input. the AMP only…
Part Number: TAS5805MEVM Hi,
Do you know the frequency response of this evaluation board? For example I can manage to send a sine wave at 15 kHz but from 20, 22 and 25 kHz on the signal is heavily attenuated. Is there an additional output filter different…
Part Number: TAS5805MEVM Other Parts Discussed in Thread: TAS5805M Hi guys:
I accidently fried my TAS5805M EVM. After some dragonize, I already replace the on board XMOS DSP(XEF216-512- TQ128-C20) myself.
However, it require specific FW to run normally…
Part Number: TAS5805MEVM Hi team,
Does TAS5805MEVM support sampling rate of 44.1kHz? I was not able to find about it on the user guide.
Best regards,
Shunsuke Yamamoto
Part Number: TAS5805MEVM Dear,
I'm trying to compare the signal in with signal out from the TAS5805MEVM board in an oscilloscope.
I am using a standard lab PSU at 12 V, and an oscilloscope connected to the J1 out1 (through a pair of cables from the…
Part Number: TAS5805MEVM Other Parts Discussed in Thread: TAS5805
Software approval requested.
A software approval request has been made. However, console software continues to be approved as an enemy.
All I need is TAS5805MEVM-SW, TAS5825MEVM-SW approval…
Part Number: TAS5805MEVM Other Parts Discussed in Thread: TAS5805 Hi team,
I'd like to consult how to change the output from OUT1/OUT2 to OUT3/OUT4 under PBTL mode of TAS5805MEVM?
Part Number: TAS5805MEVM Dear, do you know how I can use this board as an analogue power amplifier ?
I need to connect it with a Debian Raspberry pi, is this even possible?
I connected to a windows 10 pc and I could connect to it with the the Pure path…