Part Number: TAS5806MD Hello.
I want to make a product using the Buletooth Chip and TAS5806MD.
I2C was connected to the above 2 product EVKIT to check the sound motion.
We also have a PUREPATH board, so we know that DRC control is possible through PPC3…
Part Number: TAS5806MD Other Parts Discussed in Thread: TAS5825M , TAS5806M Hi, TI support team
If you look at the datasheet, it says that EEPROM and flash can be used.
EEPROM IC is also used in EVKIT.
So, is it possible to use it like below?
Q. Is it…
Part Number: TAS5806MD Other Parts Discussed in Thread: TAS5806M Hi, TI support team
I have received inquiry from customer.
1. Can TAS5806MD use the DSP Memory Register below?
Do I need an external storage device such as eeprom or flash memory to use…
Part Number: TAS5806MD Dear support,
For TAS5806MD,
In case we used this IC on our product which doesn’t need the headphone feature, can we just layout as follow?
No 3.3V supply to HPVDD
No capacitor mount on HPVSS and CPP/CPN
HPL_OUT/HPR_OUT leave…
Part Number: TAS5806MD We have run into an unusual problem with the TAS5806MD amplifier. We have two amplifier ICs on our PCB. One is set up for 2.0 BTL, and the other for 1.0 PBTL. Both amplifiers seem to take the initialization from the .cfg files created…
Part Number: TAS5806MD Other Parts Discussed in Thread: TAS5806M , Hi , support team,
We have the PCB which designed for TAS5806M.
Is there any problem to use that PCB for TAS5806MD?
TAS5806MD has a headphone amplifier, but PCB is designed for TAS5806M…
Hi MJ.
Our AMP can't support such long fade in/out time currently.
Another solution as below, but it still can't realize such long fade in/out time.
BR.
Wei Qiu.
Part Number: TAS5806MD This IC has Headphone out feature.
If we do not need the headphone feature, can we just:
No 3.3V supply to HPVDD
No capacitor mount on HPVSS and CPP/CPN
HPL_OUT/HPR_OUT leave it OPEN
Part Number: TAS5806MD We would like to expose controls that allow the end-user to change the 3-band DRC settings (ratio, attack/release, threshold, makeup, crossover positions, etc.). I found an e2e article with a reference to the EQ equations ( https…
Part Number: TAS5806MD Other Parts Discussed in Thread: PCM9211 Dear, TI Support Team
Inquiries have been received from customers regarding the specifications of TAS5806MD.
[Inquiry 1]
If you look at the TAS5806MD specification sheet, there is a DC OFFSET…
