Part Number: TAS5822M Tool/software: Hello,
we are working on a prototype consisting of TAS5822M which is configured with a microchip microcontroller.
So far we have configured the class D amplifier with the I2C protocol and we are sending te I2S…
Part Number: TAS5822M Tool/software: Hello TI team,
I am using TAS5822M with PPC3. Currently I face an issue where the Main EQ seems not to take effect after exporting and programming the registers via I²C.
Test scenario:
Input: I²S audio. …
Part Number: TAS5822M Tool/software: Hi
After the TAS5822M overheat protection is activated for a short period of time, frequent activation of the overheat protection will cause the IC to shut down. If the restart time exceeds 48 hours and the latter…
Part Number: TAS5822M Tool/software: Could you provide me with the demo code of the tas5822m driver?
We're going to use this chip.
And the tools of Purepath console & ppc3_platform_winInstaller.
Thanks.
Part Number: TAS5822M Tool/software: Hi TI support team,
As for PPC3 tool can generate the sample tas5822M driver code for RTOS.
How can I get the ppc3 tool?
My access denied.
Part Number: TAS5822M Tool/software: Hello, TI Team I am not sure if I can communicate well because my English is not good enough, but thank you in advance. When the speaker is not connected and white noise is sent via I2S, if the POWER_STATE register…
Part Number: TAS5822M Hello,
I would like to request technical support regarding the TAS5822 amplifier. Could you please review and validate my schematic for a design based on the TAS5822, which will be powered at 18 V?
I am also experiencing crackling…
Part Number: TAS5822M Tool/software: Hi Ti team,
When using the TAS5822, customers have reported that the speakers are generating a lot of heat. Could you please provide guidance on how to adjust the TAS5822's registers?
PVDD=16V ; Speaker=4Ω
Part Number: TAS5822M
Tool/software:
Dear expert:
Could you help on below technical issue?
Test conditions: PVDD = 24V, speaker load: 4Ω@PBTL mode
The following two PPC3 files have the same parameter configurations except for the positions of…