Part Number: TAS5822M Hi team,
Regarding the control of tas5822 PDN, after pulling PDN low and then high, the customer reset the initial table settings.
But there is still no sound.
The customer followed the note in datasheet 7.4.7 about this problem…
As we discussed on the Webex, we need to make sure what is the TDM format customer is using. And the swap problem could be solved as I have suggested. You could send e-mail to our AE member Donny directly to solve this problem.
Part Number: TAS5822M Hi Expert,
Could you pls tell me whether the SDOUT could be floating and whether we could change the register in order to set SDOUT high? If we can, how can we change it? Thanks.
Part Number: TAS5822M Hello everyone!
How does the TDM of the TAS5822M work? Suppose I have a 48kHz audio stream with 16 slots of 32 bits each, and I want the left channel of the TAS5822M to play slot 2 and the right channel to play slot 5. How do I assign…
Part Number: TAS5822M Other Parts Discussed in Thread: TAS5825M , PCM9211 Hello there,
I have a speaker with a TAS5822M as an amplifier in the PCBa.
I have downloaded the PPC3 to my PC.
1- What cable do I need to purchase to connect my PC to the TAS5822M…
Part Number: TAS5822M Other Parts Discussed in Thread: TAS5825M , Hello everyone, The datasheet recommends 390uF capacitors for PVDD stabilization. How important are these? The TAS5806 and TAS5825M don't need them and can run with 22uf MLCC caps. Could the…
Part Number: TAS5822M Hi Team,
The customer sets the Output Crossbar through the EVM, and then outputs it to the dump.c file, Then use the I2C interface to set another TAS5822M, The volume of the Output Cross Bar does not respond, where do I need to set…