Hi Manu,
Manu Chang said: is the MCLK pin for the TDM a must to use? Can they only use the SCLK & FSYNC pin since there is no MCLK pin in A2B? How should they deal with MCLK pin if it is unused?
They can be connected together:
Manu Chang said…
Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6422E-Q1 Hi team,
We found some STBY Current parameter issure from datasheet.
The customer found that the STBY current of the TAS6424E-Q1 is even lower than that of the TAS6422E-Q1. Why…
Hi
Tanaka Nobutomo said: Could you please confirm whether this interpretation is correct?
Yes, correct.
Tanaka Nobutomo said: In other words: Does T_LA represent the number of FSYNC sample periods of latency from digital input to the analog output…
Part Number: TAS6424-Q1 Other Parts Discussed in Thread: TAS6424E-Q1 , TAS6424 Tool/software: We are using the MIMX8ML6CVNKZAB processor for our audio development project and have selected the TI_TAS6424-Q1 audio amplifier, which communicates over the…
Part Number: TAS6424-Q1 Dear TI Team,
We are currently developing an automotive infotainment system based on the NXP MIMX8ML6CVNKZAB (i.MX8M Plus) processor and request your support in reviewing our audio architecture and amplifier schematics prior…
Part Number: TAS6424-Q1 Dear TI Team,
We are currently developing an automotive infotainment system based on the NXP MIMX8ML6CVNKZAB (i.MX8M Plus) processor and request your support in reviewing our audio architecture and amplifier schematics prior…
Part Number: TAS6424E-Q1
Hello,
Our customer has a plan to configure 2ohm woofer and AC coupled 4ohm tweeter speaker in parallel connection, no less than 2ohm total impedance with 3kHz cross over frequency design. In this configuration, he has some…
Hi Nobu
Tanaka Nobutomo said: Could you please clarify whether the measurements for the TAS6424-Q1 correspond to the PHASE_SEL = 0 setting, and the measurements for the TAS5424E-Q1 correspond to PHASE_SEL = 1?
You could say that.
And there's no…
Hello Luis Fernandes de Pina ,
We are enabled AC diag on channel3 and channel4. we are connected tweeter(4 Ohm) with parallel to speaker(4 ohm). tweeter connected and not connected scenario is working fine. Below Scenario facing issue: 1.channel3 connect…
Part Number: TAS6424-Q1 Tool/software: We are in the process of PPAP Level 3 through the TI website.
I received an email saying that I need to proceed with MIC NDA.
Please let me know how to proceed.
