Search tips
Showing 45 results View by: Thread Post Sort by
    Answered

  • TAS6424M-Q1: about optimal speaker connector and wiring

    Resolved
    Part Number: TAS6424M-Q1 Dear expert, We use TAS6424M-Q1 in automotive IVI application with a 24pin connector for PA output to speaker wiring. Due to the 3A current limit per pin for the connector, with 12V PVDD, 2 Ohm speaker and BTL configuration…
    • Resolved
    • Answered

  • TAS6424M-Q1: "Maximum" output power per channel

    Resolved
    Part Number: TAS6424M-Q1 Other Parts Discussed in Thread: TAS6424 Dear expert, I see that datasheet listed the output power, this is based on sine wave before clippling, right? 4 Ω, PVDD = 14.4 V, THD+N = 1%, TC = 75°C 22W My question is, if I further…
    • Resolved
    • Answered

  • TAS6424M-Q1: 3.3V will be applied on the I2C pin when TAS6424 is off. Is that problem?

    Resolved
    Part Number: TAS6424M-Q1 Other Parts Discussed in Thread: TAS6424 Application is using TAS6424M-Q1. The customer will use the other power line for the I2C pull-up because it need to communicate with I2C when TAS6424 is off. The question is: 3…
    • Resolved
    • Answered

  • TAS6424M-Q1: Question about GAIN settings aka. "Peak output voltage/dBFS"

    Resolved
    Part Number: TAS6424M-Q1 Other Parts Discussed in Thread: TAS6424 Dear expert, I have a question about GAIN settings in TAS6424. The datasheet says that "The peak output-voltage swing is also configurable in the gain control register through I2C. The…
    • Resolved
    • Answered

  • TAS6424E-Q1: TAS6424 PBTL schematic error in datasheets

    Resolved
    Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6424 , TAS6424MS , TAS6424-Q1 , TAS6424M-Q1 , TAS6424L-Q1 , TAS6424MS-Q1 , , TAS6422E-Q1 , TAS6424E Tool/software: Hello, I wanted to use a TAS6424 evaluation board in PBTL. I followed the…
    • Resolved
    • Answered

  • TAS6424E-Q1: Comparison table

    Resolved
    Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6424L-Q1 , , TAS6421-Q1 , TAS6422E-Q1 , TAS6424-Q1 , TAS6424M-Q1 , TAS6424MS-Q1 Tool/software: Hi team, Do we have the comparison table of TAS6424-Q1, TAS6424M-Q1, TAS6424L-Q1, TAS6421-Q1…
    • Resolved

  • TAS6424E-Q1: Does TAS6424E , TAS6424M or TAS6422 remember register setting after goes into standby mode or get back from standby mode?

    Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6424E Hi MPA BUs, This is Koki Tsushima. Thank you for your continuous support. I want to ask you that does TAS6424E, TAS6424M or TAS6422 remember register setting after goes into…

  • [FAQ] PUREPATHCONSOLE: Software lookup table for audio devices

    TI Thinks Resolved
    Part Number: PUREPATHCONSOLE Tool/software: A table with links to all the software needed for audio devices and their EVMs. Find the device(s) of interest in the table and use the links to request access to the software you need. Product or…
    • Answered

  • TAS6424E-Q1: Output Phase

    Resolved
    Part Number: TAS6424E-Q1 Other Parts Discussed in Thread: TAS6424MS-Q1 , Is it possible to configure this device so that the channel-to-channel PWM output phase is zero for all four channels? (like TAS6424MS-Q1)
    • Resolved
    • Answered

  • output LC filter

    Resolved
    Part Number: TAS6424M-Q1 Other Parts Discussed in Thread: TAS6424 in document slaa701 page21, it is said that "Some amplifiers require minimum inductance on the output. This specification is important to keep the amplifier reliable during an overcurrent…
    • Resolved

Didn't find what you are looking for? Post a new question.