Part Number: TAS6424R-Q1 Other Parts Discussed in Thread: TAS6424 , TAS6424E , , TAS6424E-Q1 Hello TI Team,
I just found the TAS6424R chip on your webpage as new version of the TAS6424 /TAS6422 amplifieres we use in our products, and i should evaluate…
Part Number: TAS6424R-Q1 Hi TI
at TAS6424R-Q1 datasheet list the serial audio port requirement timing, we found the requirement of tRISE/tFALL time is lower than 5ns, see below picture, please help to check this requirement is applied for all MCLK/BCLK…
Part Number: TAS6424R-Q1 Other Parts Discussed in Thread: TAS6424 Hi TI
we find only one 470uF electrolytic capacitor connect to PVDD power supply in Typical 4-Channel BTL Application Schematic, but now we would like to know how much capacitance value…
Part Number: TAS6424R-Q1 Hi
the bootstrap capacitor value is 1uF in datasheet recommended schematic, but at 10.2.1.2.3 chapter descripted that bootstrap capacitor change to 2.2uF for below 30Hz.
now we need output audio frequency 20Hz~20kHz, does…
Part Number: TAS6424R-Q1 Hi TI
below schematic is from EVM user guide file, there is a Pi LC filter with 1.5uH inductor before PVDD power supply.
could you please share us how to do select this inductor?
if this inductor value is larger or smaller…
Part Number: TAS6424R-Q1 Hi
I would like to check whether PVDD buck capacitor value will affect output THD parameter.
how to calculate the relation between PVDD capacitor value and THD value?
Part Number: PUREPATHCONSOLE
Tool/software:
A table with links to all the software needed for audio devices and their EVMs. Find the device(s) of interest in the table and use the links to request access to the software you need.
Product or…
Hi Ishak.
The calculation formula as below:
Typically, you can judge if the tweeter is connected or not by load changes.
Puneet Sahu said: While Same impudence diff speaker has give diff impedance value why this behavior are getting?
You mean…
