Part Number: TDP158 Other Parts Discussed in Thread: SN65DP159 , TDP0604 Hi team,
From TI.com latest datasheet, I see we have removed the TDP158I information. Do we still provide TDP158I now?
ASUS used TDP158 before, now they need wide temp range version…
Part Number: TDP158 Hi team,
Customer use a camera module in their products, the signal is 6Gbps 4k@60hz with HDMI2.0 interface. they want to make sure the signal can be transmitted to 5 meters. Can TDP158 be used to pre-emphasis the HDMI2.0 signal for…
Part Number: TDP158 Other Parts Discussed in Thread: TDP0604 , Dear Technical Support Team,
What's the difference between TDP158 and TDP0604 ?
I'd like to use DDI to HDMI2.0b with 10b formats.
Best Regards,
ttd
Part Number: TDP158 Hello expert,
Can we connect D2 to CLK(TDP158)/D1 to D0(TDP158)/D0 to D1(TDP158)/CLK to D2(TDP158)? I searched from E2E forum and only see D2 can be connected to CLK, but if we need to connect totally opposite way with TDP158 setting…
Part Number: TDP158 Other Parts Discussed in Thread: TMDS181 Hi team,
Do we have a HDMI 2.0 repeater solution like below IC? If yes, Could you please recommend one of them?
Thank you very much in advance.
Jay
Part Number: TDP158 Hello
we are producing LVDS data from FPGA and trying to supply to display panel.
Looks like we need physical layer change when we drive displays - CML logic
Now in TDP158, it seems, there is a 100Ohm termination, but i see common…
Part Number: TDP158 Other Parts Discussed in Thread: TMDS181 Hi sir,
My customer use TDP158 as HDMI redriver on intel Elkhart lake platform and they have question about HDMI level shifter configuration on bios setting: If they set the level is 450mV …
Part Number: TDP158 Hi Sirs,
My customer used the TDP158 to develop an HDMI re-driver board(HDMI RX side has pull-up 49.9Ohm to 3v3), when they connected TDP158 from M/B(Intel H410 chipset) to Monitor, there is no BIOS screen shown.
If they connected…