Part Number: DS90C387A Other Parts Discussed in Thread: TFP403 Hi,
We are developing HDMI interface with LVDS display . For that we are using TFP403 and DS90C387A.
So can any one help us how to interface the TFP403 wtih DS90C387A In single channel…
Part Number: TFP403 Other Parts Discussed in Thread: DS34RT5110 , , TMDS181 the actual design is using 2x DS34RT5110 + TFP403 to interface different grafic cards to a single monitor simultaneously. which are the recommended parts to upgrade the design…
Part Number: TFP403 Other Parts Discussed in Thread: TFP501 I have a customer asking the following questions concerning the TFP403:
What happens on the output if the TMDS input (normally from a DVI source) contains embedded audio (as though it was coming…
Other Parts Discussed in Thread: TFP403 Hi All,
I'm Alice working as TI Korea FAE.
Could I get some comment about TFP403? Could I change the TFP403 HSYNC duty cycle? I want to get the HSYNC cycle which have same one cycle period but change the high…
Other Parts Discussed in Thread: TFP403 Hi,
I have an old screen using tfp403 which support hdmi DVI 1.0. Can I use this with new PC which support hdmi DVI 1.3 or DVI 1.4?
Thank you,
Kien.
Other Parts Discussed in Thread: TFP403 , SN75DP139 , SN75DP130 Hi,
We are trying to integrate SN75DP130SS along with TFP403.
Please share the reference schematics.
regards,
Nagendra
Hi,
Our requirement is to use a DisplayPort receiver with 8-bits of R, 8-bits of G and 8-bits of B pixel outputs.
Since there are no chips from TI supporting for the complete Displayport receiver with 8,8,8 bits of pixels, we have planned to use SN75DP130SS…
Other Parts Discussed in Thread: TFP403 Hi,
I am struggling with the interface to an TFP403 (part of an FMC-DVI card from Avnet).
When connected to a DVI HD-source, the signals H/Vsync and CLK and DE are coming out, and
look good (1920x1080p50)…
Other Parts Discussed in Thread: TFP403 Dear TIer :
Regarding to TFP403, pin #67 is CAP pin.
What is the function of CAP internally?
And If I tie 4.7pF instead of 4.7uF to gnd, what would be expected?
Other Parts Discussed in Thread: TFP403 , TFP401 , TFP401A-Q1 We need to convert HDMI input to RGB and we don't need HDCP. Looked at TFP403 but at least -20c is needed on the lower side which is not supported by TFP403. Any TFP403 variant that support…
