Part Number: THP210 Hi Team,
A customer noticed what seems to be an error in the datasheet. May I ask your help to investigate on this.
At page 9 of the THP210 datasheet, Figure 11 says Small-Signal Step Response, but the input signal is 11V peak. Also…
Hi Luis,
I hope your week has been going well.
We have a problem with the availability of the differential amplifier i.e. THP210. Is there any other equivalent for THP210?
Thank you for your time and consideration.
Hi Danilo,
Thanks Kai for the reply. I noticed that you are taking a few days off. Welcome back!
Q: The schematic diagrams I found from our application notes have single ended output. Do we have a circuit with differential output?
The INA333 has -3dB…
Alex,
One of my linear apps colleagues, did send me this:
*****
I don’t completely follow exactly how the shunt is connected to 48-V high side or low side; and the block diagram does not describe in detail the common-mode conditions.
An FDA, such…
Hi Martin,
a) I am wondering why both ratings have the same value of +36V? Usually the maximum rating has a higher voltage rating (e.g. OPA192 : +40V Maximum; +36V Recommended).
b) How should we take care about the maximum V+ rating in our design? Is there…
