Other Parts Discussed in Thread: TIDA-00155 Hi, I am trying to establish the levels of performance of the DLPNANOEVM and the DLPNIR module TIDA-00155. The data given in the data sheets refers to a 'signal to noise' ratio - but there is no indication of…
Gyanendra,
Welcome to the E2E forums, and thanks for your interest in our DLP technology.
Unfortunately, we do not offer a DLP4500NIR EVM without optics for purchase. If you want to design a system using the DLP4500 NIR chipset with your own optical…
Tina,
The NIRscan EVM is a 4500NIR-based EVM, which comes with an associated reference design. The resources you are looking for can be found below:
www.ti.com/.../tida-00155
www.ti.com/.../dlpnirscanevm
I hope this helps.
Best Regards, …
Derya,
Welcome to the forums and thanks for your question. For the DLPNIRSCANEVM, only a transmissive head is shipped. There is a reflective head design which can be found here in the reference design: www.ti.com/.../tida-00155 . You would have to…
Hi Michael,
It is possible. Both the DLP2010NIR and DLP4500NIR DMDs are compatible with wavelengths from 700-2500nm. The software for NIRscan Nano was actually designed with this flexibility in mind, so there should not be a huge amount of software…
Paolo,
Welcome to the E2E forums, and thanks for your interest in our DLP technology.
The DLP4500NIR DMD needs to be accompanied by the DLPC350 controller as part of a full DLP system. To faciliate design of a system using these components, we have…
Hi Danielle,
Thanks for your questions and welcome to the DLP forums.
Have you seen the reference design files? We include all of the zemax optical files, CAD models, and more.
www.ti.com/.../tida-00155
www.ti.com/.../tidc293c
1. Take a look…
Hi Andrea, Welcome to the DLP Forums and thank you for your question. The DLPNIRSCANEVM is capable of the range you are asking about. In the design files for the EVM we have published the design for a reflectance head which replaces the transmissive unit…
Hello,
In addition to the user’s guide, I would recommend checking the reference design files ( TIDA-00155 ) to best answer your questions.
Please keep in mind that our EVMs are intended to be a starting point for designers and not end products. Given…
Hi Justin, The DLPNIRSCANEVM uses a Sitara processor running Linux to actually perform the scans and host the web interface to the device. You're able to use the Lightcrafter 4500 GUI to see NIRscan module because the Lightcrafter 4500 and NIRscan share…
