Part Number: TIDA-00374 Other Parts Discussed in Thread: CC2650 , TPL5110 , CC2540EMK-USB , , CC2540 We have build the TIDA 00374 ( Humidity & Temp Sensor Node ) at our end and downloaded the TIDA00374-Firmware.OUT ( Date: 16-03-2016) file by using Smart…
Part Number: TIDA-00374 We are using TIDA00374 TI reference design and in this PCB Gerber file "tidc949a", impedance control information related to antenna and RF section is not included in the Gerber file. Would you please share it?
Part Number: TIDA-00374 Hello guys,
I am trying to develop my own board based with the reference design from TIDA 00374 project.
I can flash with the CCS with no problems and can debug with the XDS110 Debug Probe, but I cannot see the Packet Sniffer data…
Part Number: TIDA-00374 We are trying to increase the frequency at which the BLE packets are being sent. We want to send one BLE packet that contains temperature and humidity settings every second.
In main.c, I can see PACKET_INTERVAL being defined a…
Part Number: TIDA-00374 Other Parts Discussed in Thread: TPL5110 , BLE-STACK , CC2650 , CC2640 , CC2640R2F I have TIDA-00374 that is beaconing at every 1 minute interval. I can see the packet on the TI - BLE packet capture device but the TIDA BLE device never…
Other Parts Discussed in Thread: TIDA-00484 , TIDA-00374 , TPL5111 , TPL5110 The reference designs TIDA-00374 and TIDA-00484 utilize BLE and sub-1GHz radios, respectively. The 484 design also uses additional boost converter and different system timer and load…
Hi Tony,
1) The hardware is probably fine - as you suspect, it's probably a firmware issue.
2) The firmware is on the TI Design page, under software: www.ti.com/.../TIDA-00374
3) Same as the link above. You'll have to flash it with a debugger …
Hi,
thank you for your explanation. I confirm what you are seeing, both in TI-RTOS 2.21 and in the current SDK: After coming from a Power-on-reset and sending a packet immediately, there is a long-running activity before the controller can enter standby…
Hi Vito,
Since you are new to TI BLE, I would recommend going through SimpleLink Academy. It's a great resource for learning how our code is structured and how you can modify it for various commands: software-dl.ti.com/.../overview.html
It would…
