Part Number: TPS65218D0 Other Parts Discussed in Thread: TIDA-00478 , , TPS6521815 , TPS65219 Hi team,
My customer is looking for PMIC for powering Zynq 7015.
I found TPS65218D0/TIDA-00478 and I consider to promote this solution.
Just in case, is…
Hi Ryu,
The available reference designs for the zynq-7000 can be found on this page: https://www.ti.com/design-resources/design-tools-simulation/processor-fpga-power/xilinx.html
This reference design uses the TPS65218 and might be helpful: https:…
Part Number: TPS6521815 Other Parts Discussed in Thread: TIDA-00478TIDA-00478 uses TPS6521815 for supplying power to Zynq 7010. In our system, a DDR3 RAM is used along with Zynq 7020. What is your recommendation to generate the 0.75V reference voltage…
Joe,
You want to use the TPS6521815. This version is intended for customer programming, and is referred to as a "blank EEPROM" device. In other words, you apply power to the part (5V typical) but all of the outputs are disconnected from the sequencer…
Part Number: TPS65218 Other Parts Discussed in Thread: TIDA-00478 , TPS65218 i want to use the pmic tps65218 to supply xilinx zynq7000 soc XC7Z010 ，but the default output voltage and power sequence of tps65218 don't meet the requirement of XC7Z015. TI…
Other Parts Discussed in Thread: TIDA-00606 , TIDA-00478 , TPS65218 , TIDA-00607 Hi, all.
I'm checking reference design TIDA-00606, TIDA-00607 and TIDA-00478 which are using TPS65218.
But some output voltage don't match default value.
Please tell…
Part Number: TPS65218 Other Parts Discussed in Thread: TIDA-00478 , , TPS650864 I refer to TI's TIDA-00478 Test Report.
I have a customer planning to use the TPS65218 on a Xilinx Zynq design. The customer will need to program the TPS65218 for the correct…
Part Number: TPS65218D0 Other Parts Discussed in Thread: TPS6521815 , , BOOSTXL-TPS65218 , TIDA-00478 , IPG-UI
We will use only four DC-DC buck converter of this PMIC (DCDC1 to DCDC4) for XC7010 xilinx IC. Voltage levels and sequencing will be done…
Other Parts Discussed in Thread: TPS65218 Hi,
I have a plan power supply for Zynq-7000. I follow schematic in this link : http://www.ti.com/tool/TIDA-00478 .
I see TPS65218's datasheet, LDO1 default 1V8 0.4A, DCDC4 output default 3V3 1.8A. My custom…
Hi Patrick, We are currently in the process of developing a few Xilinx related TI Designs for TPS65086x family, including a couple for the Zynq Ultrascale+ (ZU9EG in this particular design). Due to the high degree of flexibility in the FPGAs we are still…
