Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Part Number: TIDA-00488 Other Parts Discussed in Thread: BQ25505 Hello expert, I have question for TIDA-00488's circuit regarding BQ25505. In the schematics, this design use 4.12M ohm for Roc2(High side) and 5.78Mohm for Roc1(Low side). Then, this configuration…
Part Number: TIDA-00488 I have designed a harvesting board almost exactly to the reference. I am using a IXYS SLMD480H12L solar panel instead. The VOC for the solar panel is 7.65V and the MPP voltage is 6.06V. When I connect it to the circuit I get 1…
Part Number: TIDA-00488 Other Parts Discussed in Thread: TIDA-00100
Hi,
My question concern the Schottky diode placed in series to the solar panel as in the reference design TIDA-00488 or TIDA-00100 for example.
Is this diode really necessary ?
Is it…
Julian,
I am sorry for the delay on this. Were you able to find the libraries you needed?
All the Altium design files associated with this TIDA can be found in the product folder here: www.ti.com/.../TIDA-00488
Regards,
Joe
The TIDA 00488 firmware is written/ tested for TI-RTOS 2.14 ( check the readme) I would recommend installing this version to get the software up and running and then later port the software to a more current version of TI-RTOS.
I have not seen this error…
Other Parts Discussed in Thread: TIDA-00488 , CC1310 Hi,
I am working on TIDA-00488 and have some questions.
As you know, TIDA-00488 is energy harvesting Sub-1 GHz Temp/Humid Sensor using CC1310.
I made a hardware using all data from you.
I fused the firmware…
TIDA-01477 is running TI 15.4-stack, which is a star-based protocol. TIDA-01477 operates as an end node, and it will communicate with a separate gateway that can be used to send out information to the cloud. This blog ( e2e.ti.com/.../sensor-to-cloud…
Other Parts Discussed in Thread: TIDA-00488 , UCC28710 I need to power the Arduino which is connected with wireless counter transmitter device which is connected 20 meters far from the power mains board, I need to know any best way which will help me to…
Part Number: CC1310 Other Parts Discussed in Thread: , TIDA-00646 , TIDA-01519 , TIDA-01476 , TIDA-00489 , TIDA-00488 , TIDA-00838 Hello.
In CC1310 datasheet (SWRS181C) on paragraph 5.19.3.2 noted that crystal load capacitance should be in range 6-12 pF. On…
Other Parts Discussed in Thread: HDC1080 , HDC1000 , TIDA-00488 , CC1310 Hi,
I am testing HDC1080 and found that there is some offset regarding humidity measurement.
Before testing HDC1080, I was using HDC1000 for my board.
HDC1000 showed about 15% offset…
