Part Number: TIDA-00589 Other Parts Discussed in Thread: BQ25895 Tool/software: Hi,
I was taking a look at the reference design for the BQ25895 and the schematic shows a 2.2uH inductor but lists part number IHLP2020BZER1R0M11 in the BOM which is very…
Hello Taeshik,
Thank you for reaching out via E2E. You can download the relevant EVM board files at the link I have included below. Under the design files section you can download gerber files as well as a pdf showing all the PCB layers.
https://www…
Hello Darren,
The EVM design information is a good starting point for the component setup: https://www.ti.com/tool/TIDA-00589
To enable boost mode the host must set the BOOST_CONFIG, which is enabled by default.
Sincerely,
Wyatt Keller
Hi Dimon,
The bq25895 is recommended for power-bank applications, and the EVM for this part gives a reference as to how to begin design for this application.
The EVM schematic, design guide, and test data can be found under the following TIDA TI…
