Part Number: TIDA-00643 Other Parts Discussed in Thread: MOTORWARE Tool/software: Hello e2e
I want to run motor on TIDA -00643 (I have assembled the hardware same from the references)
I have downloaded TIDCB14, TIDA-00643.zip from motorware Texas…
Part Number: TIDA-00643
I am testing a High speed slotless BLDC motor with TIDA - 00643 hardware.
The motor that I am testing is a low inductance high speed motor with maximum speed of 37,000 rpm.
When I am testing the motor at 9.6V. The Power stage…
Part Number: TIDA-00643 Greetings.
We are working on TIDA-00643 board.
We are able to limit the motor current by changing USER_MOTOR_MAX_CURRENT until 11A
But, when the limit is given beyond 11A, the motor starts vibrating although, the vibrations…
Part Number: TIDA-00643 Other Parts Discussed in Thread: BOOSTXL-DRV8305EVM , DRV8305 , LMR16006 , TMS320F28027F Greetings.
We have fabricated TIDA-00643 reference board and all the components which were given in the BOM file were soldered on to the…
Part Number: TIDA-00643 Dear team,
Please confirm the following information:
1 Does TIDA-00643 have a limit on the bus voltage in hardware? Why when I use CCS to see the bus voltage measurement value, no matter how I change the power supply voltage…
Hi Anushka,
I am not very familiar with the software for the TIDA-00643, so I do not know if you can increase that higher. If you do change the shunt resistance on the board, remember to find the equations in the code that use the previous shunt value…
Part Number: TIDA-00643 Other Parts Discussed in Thread: DRV8305 I am working on Instaspin ProjLab5b.
The hardware is TIDA_00643.
The Supply voltage is 12V. It is battery operated.
The power consumption when motor is not running and enable is reset…
Part Number: TIDA-00643 Other Parts Discussed in Thread: MOTORWARE Greetings
I am facing a problem with TIDA-00643 custom board.
I have tried speed control using lab 3a and bypassed Rs calibration also and initialized flag_identity and flag_enablesys…
Part Number: TIDA-00643 Other Parts Discussed in Thread: MOTORWARE , CCSTUDIO Dear TI support,
I am an hardware engineer, and not quite used to TI microcontrollers.
I found this board really interesting. However documentation about software looks…
Natsu Sekai said: The ADC value which is attached in the photos above are given a maximum of 1.65V for both USER_MOTOR_MAX_CURRENT 10A and 40A. How should the ADC value be interpreted as it is supposed to rise according to the current drawn?
You might…
