Hello Amuray,
Can you explain why they need a source impedance that large? Is this an intended voltage division effect where the voltage being sensed is 100s of volts and it needs to be divided down for the FSR of the ADC or some other reason? I noticed…
Fred,
I would start by looking over the following TI Design:
https://www.ti.com/tool/TIDA-010036
It shows a design measuring energy for a single phase power using the ADS131M04, which is the four channel version of the eight channel ADS131M08…
Christian,
I don't have any specific data on the internal protection diodes for the ADS131E08. However generally they are setup up like this:
As the input goes above the AVDD, current is shunted through the diode to AVDD. As the input goes below…
Hi Deepak,
This looks like a bus contention issue to me, at least for MOSI.
Deepak c said: Is it because of iso7762 output type problem.. like iso7762 is push pull? It could be because when one of the devices trying to send MISO signals others devices…
Hello Art,
Can the ADS131M06 be configured to support the 6 single-ended ADC channels?
The short answer is yes, there's no problem doing this.
I would like to confirm that the customer understands that they'll lose half of there effective dynamic…
Hello kwon,
It looks like you're just starting to dive into the world of ADCs. So first, I'd like to say welcome!
If you have not reviewed:
[Video Series] TI Precision Labs – ADCs (TIPL)
[FAQ] Have a question about ADCs? Click here for FAQs…
