Part Number: TIDA-01473 For DLP LCD2000 EVM, can I directly use "USB to IIC" and assistant tools on the computer to directly read and write registers? If yes, how?
----------------------------
When writing, 36 0E 00000001 is sent
When reading…
Hello Jejomar,
Welcome back to the E2E forum!
Have the customer reviewed the reference design files ( TIDA-01473 )?
I will need to check with the team if we have the information of the height dimensions of the EVM.
Regards,
Lori
Part Number: TIDA-01473 I am trying to get the Altium CAD files for this reference design. Page 17 of the user guide ( for this reference design TIDUD78: http://www.ti.com/lit/ug/tidud78/tidud78.pdf
Part Number: DLP2000 Could you please give details about DMD connector (J1) on DLP2000 EVM , I am unable to get information . On the BOM list the part is listed as (J1 50028-05081-001) ACES electronics . I want the information like pitch , and size details…
Hello Renan,
The TI deign TIDA-01473 is based on DLP2000EVM. This evm uses same optical engine. You can use this reference design to get information on the Flex cable pinout.
We source the DLPM2000EVM (DLP2000 optical engine) from third party along with…
Hello Dani4lo,
Please refer to "Table 4-1. Allowable Pattern Combinations" (page 45) of DLP4500 EVM user guide for supported pattern and exposure time.
https://www.ti.com/tool/TIDA-01473
The 1 ms exposure time will require that the pattern could…
Hi Baudet,
The DLPDLCR2000EVM can be interfaced with almost any microcontroller. Please see the reference design documents here: https://www.ti.com/tool/TIDA-01473 , and reach out if you have any specific questions.
Thank you,
Chris
Vladimir,
I recommend you use the LED_SEL0 and LED_SEL1 lines from the PMIC (DLPA1000), which are used to modulate the RGB LEDs. You can find them via the reference design schematic.
https://www.ti.com/tool/TIDA-01473
Best Regards,
Philippe