Part Number: TPA6211A1-Q1 Other Parts Discussed in Thread: TIDA-01529 Hello experts, My customer is considering an external load diagnostics circuit (especially open detection) for TPA6211A1-Q1. I found a below TI-Design and application note. They are…
Hello Fedor,
The TAS2505Q1 EVM is a TI Design ( TIDA-01529 ) and has available gerbers, schematics, etc.
The TI Design implements a variety of diagnostics and input interfaces that you would have to optimize to fit your design but I will believe it…
Hello Clarion-hejun,
The TAS2505-Q1 does have Short-Circuit Protection which determines if there is a short to ground, power, or between terminals as you stated.
Additionally external diagnostics can be added to your design. We have a TI Design that…
Hi Xiaofu,
After review of the schematic, I'm adding some comments below:
Currently we're not recommending to use the internal LDO, I would suggest to short LDO_SEL pin to GND and use an external source for AVDD and DVDD
It is recommended to not…
Hi,
All your configuration seems to be correct. Is it possible to order a TAS2505EVM board to test your I2S signals and ensure that the audio is being sent correctly?
www.ti.com/.../TIDA-01529
This would be helpful to get a better approach to…
Hi Luis,
It is really helpful to me. I have further replies, please check it below:
2. In my design, DAC_CLK = 43.008MHz which is much higher than EVM design (6.144MHz), Do you have the recommend DAC_CLK range?
7. Yes, I am using TIDA-01529 instead…
