Part Number: TIDA-080000 Hi Experts,
FPGA "XC7Z020-1CLG484I" is used in schematic of TIDA-080000.
but, I would like to use "XC7Z020-1CLG484C".
Does it work properly if I change "XC7Z020-1CLG484I" to "XC7Z020-1CLG484C" in schematic of TIDA-080000…
Part Number: TIDA-080000 I purchased the DLPDLCR3310EVM (TIDA-08000) along with an independent power cord. The projector is working, but how do I project the image that I want? I am not super tech savvy, but I have the projector attached to my laptop…
Hello User,
Welcome to the E2E forums and thank you for your interest in DLP ® technology.
The DLP3310 is only meant to be used with the FPGA + dual DLPC3437 and DLPA3000 chipset. We do not provide support for use cases outside the scope of the complete…
Hello Archie.
Welcome back to the forum.
Can you speak more on this request? Are you hoping to fit a 4K DMD into a DLP3310 system, being controlled by a DLPC3437?
Depending on your goal, you might find the Flex Cable Design Files on the DLPDLCR3310…
Hello Renan,
The reference design TIDA-8000 - Mobile 1080P display reference design using DLP 0.33 inch micromirror array" is based on DLPDLCR3310EVM. Please refer to 3D model in the reference design.
https://www.ti.com/tool/TIDA-080000
regards…
Thanks. Do you have also the design files for the Leds Pcbs? They are similar to this one.
On the page https://www.ti.com/tool/TIDA-080000#tech-docs I was only able to find schematics for the main pcb.
User,
The only solution for the DLPDLCR3310EVM available is the EVM itself. If you want to design a board that has an Android SoC built in, you will probably want to leverage the reference design associated with it to add your own frontend (and motor…
Hi Mark,
Powering the device remotely will not be possible with the physical switch in the DLPDLCR3310EVM.
To control system power remotely, you may consider hardware changes. It could be possible to replace SW1 and SW2 with relays or transistors…
