Search tips
Showing 19 results View by: Thread Post Sort by

  • RE: DLP3010EVM-LC: Turning the projector LED on/off using an pin

    Hi Kristian, Details for the SW_ON/OFF switch can be found in the DLP3010EVM-LC User's Guide . You can also find the schematic by referencing TIDA-080003 . GPIO information can be found in Section 5 of the DLPC3478 datasheet . Regards, Austin

  • DLPC3436: PWM_IN and COM_OUT in TIDA-080009 (0.23 1080p EVM)

    TI Thinks Resolved
    Part Number: DLPC3436 Other Parts Discussed in Thread: TIDA-080009 , DLPA2005 , DLPDLCR230NPEVM , TIDA-080003 PWM IN +RC filter is used as the comparator’s reference voltage and act as “ADC” for DLPC3436 by harvesting COM_OUT base on one of the input…

  • DLPC3478: DLPC3478 firmware loading only the first part

    Part Number: DLPC3478 Other Parts Discussed in Thread: DLP3010 , DLPA2005 , TIDA-080003 , , DLP3010LC Hello, the DLPC378+DLPA2005+DLP3010 board we developed by ourselves now has the same Flash model as the TIDA-080003 reference design W25Q32JVSSIQ. Now…
    • Answered

  • DLP3010EVM-LC: Which programs do you recommend to use to open the reference design files(dsn, opj, drl, brd, ...)?

    Resolved
    Part Number: DLP3010EVM-LC Other Parts Discussed in Thread: TIDA-080003 Hi, Currently, we are looking at the reference design documents which we can find on the TI page ( Design guide — TIDA-080003 ) We are trying to miniaturize the projector…
    • Resolved

  • DLPC3478: The DLP oven has an outage problem

    TI Thinks Resolved
    Part Number: DLPC3478 Other Parts Discussed in Thread: DLP3010EVM-LC , , DLPA2005 , TIDA-080003 Dear Sir Our problem is that the projection of DLP is suspended for about two hours.The set of chipsets we use is :dlpc3478+ dlpc3010) + dlpa2005.We design…
    • Answered

  • DLPC3433: Ferrite Bead Information

    Resolved
    Part Number: DLPC3433 Other Parts Discussed in Thread: TIDA-080003 , DLP3010 In DLPC3433 Datasheet (Rev E) section 10.1 it mentions criteria for selecting a ferrite bead I noticed in the DLP3010 reference design (tida-080003_dlp3010evm_LC_displayboard_revB…
    • Resolved

  • RE: DLPDLCR3010EVM-G2: DLPDLCR3010EVM

    Hi Vladimir, Please use the following links to review the reference designs: DLPDLCR3010EVM-G2: https://www.ti.com/tool/TIDA-01571 DLPDLCR3010EVM-G1: https://www.ti.com/tool/TIDA-00384 DLP3010EVM-LC: https://www.ti.com/tool/TIDA-080003 Regards…

  • RE: DLP3010EVM-LC: How to remove high-frequency flickering (1-2kHz) when displaying at 120*3=360fps mode on DLP3010EVM-LC

    Hi JH, Please see the design files for this EVM here: https://www.ti.com/tool/TIDA-080003#design-products . You will need to trace or extract contact points for probing the PDATA lines on the controller side. Thank you, Chris
    • Answered

  • RE: DLP3010EVM-LC: 3D model or technical drawings

    Resolved
    Hi Ksawery, you can find all the 3D Design and assembly files here on this page: https://www.ti.com/tool/TIDA-080003 Thanks & Regards, Hirak.

  • RE: DLP3010EVM-LC: I need a mechanical drawing of the projector.

    Hello Haein, Welcome to TI E2E forum and thanks for showing interest in the DLP technology. You can find the design files of DLP3010EVM-LC in the following link - https://www.ti.com/tool/TIDA-080003 Regards, Mayank

Didn't find what you are looking for? Post a new question.