Part Number: TIDM-02007 Other Parts Discussed in Thread: SFRA , Hey TI experts,
We want to develop a Low-cost BLDC motor position control and we have found out that this specific example project " Design Guide: TIDM-02007 Dual-Axis Motor Drive Using…
Part Number: TIDM-02007 Other Parts Discussed in Thread: LAUNCHXL-F28379D , BOOSTXL-3PHGANINV , LAUNCHXL-F280025C I am trying to follow the reference design: TIDM-02007 reference design to control my PMSM motor. Compiling the project to FCL_LEVEL2 and not…
Part Number: TIDM-02007 Hi Team,
A quick question from the customer about TIDM-02007 code:
void FCL_initADC_3I(MOTOR_Vars_t *ptrMotor, uint32_t basePhaseW, uint32_t resultBaseA, ADC_PPBNumber baseA_PPB, uint32_t resultBaseB, ADC_PPBNumber baseB_PPB, uint32_t…
Part Number: TIDM-02007 Hi Team,
My customer is currently debugging based on TIDM-02007. At present, when testing Level 4, it is found that the motor cannot start normally (it shows that the motor does not move, but there is current, which is similar…
Jenson said: When the motor is in the state of “wait for index”, the rotation of the motor is not so smooth. Although the current waveform is ok, it will have an effect similar to that of a stepper motor. I don't know that why. And we would like to let…
Part Number: TIDM-02007 Other Parts Discussed in Thread: TIDA-00909 Hi Team,
I am currently testing this design.There are currently some problems。
1.We also use TIDA-00909 as the power board, if these parameters do not need to be modified?
2.Should I…
Part Number: TIDM-02007 Hi Team,
I am working in a project,use TIDM-02007.Now I meet some problem about eQEP.
We need to use eQEP reset in index, so I change the code from
EQEP_setPositionCounterConfig(obj->qepHandle, EQEP_POSITION_RESET_MAX_POS , (…
Part Number: TIDM-02007 Hi Team,
I am using this design to make plans for clients. At present, I want to make sure that M1_BASE_CURRENT has a corresponding relationship with iq. If iq_ref=0.1 is set in LEVEL3, then the current output by the motor is 0…
Part Number: TIDM-02007 Other Parts Discussed in Thread: C2000WARE Hi Team,
Sorry to bother you.I am currently testing the code of TIDM-02007. The level 1 test has been completed.But I found a new problem when testing LEVEL2.
I set up Level2 according…
Part Number: TMS320F280049C Other Parts Discussed in Thread: TIDM-02007 Hi Team,
I was experimenting with TIDM-02007. After I entered the preliminary settings, the compiler got such an error. After I checked it, I found that ElecTheta was not defined in…