Part Number: TIDM-02002 Tool/software: Hi,
We are currently considering whether it is possible to digitally control a power system consisting of a three-phase AC input followed by PFC and DC/DC conversion.
We are planning to use separate MCUs to independently…
Part Number: TMS320F28377S Other Parts Discussed in Thread: SFRA , TIDM-1000 Dear Experts,
Looking at the Resource Explorer, the example project for TIDM-DC-DC-BUCK- DC-DC Synchronous Buck converter is only available for F28004X family.
Is there…
Part Number: TPS54620 Tool/software: Hello,
We are using TPS54620 in one of our project for avionic. We need pass conducted and radiated EMI according standard RTCA-DO160 Cat M.
Unfortunately we did not pass conductive limits at frequencies 749kHz…
Part Number: TMS320F280049C Other Parts Discussed in Thread: TIDM-02000 , C2000WARE
Tool/software:
Hi all,
I am having a problem with implementing the TIDM-02000 PCMC PSFB code on our custom hardware. When I am trying to run the open voltage loop…
Hi Junaid,
PMP21529 is far away from the power level you are doing, the power stage needs to be totally redesigned, also may need multi-phase run in parallel. I would recommend PMP23421 for you, it is 8.1KW, similar to your requirement:
https://www…
Part Number: TIDM-DC-DC-BUCK Hi,
I adapt TIDM-dc-dc-buck to control a boost converter. This problem happens at close loop voltage mode. Basically, it can regulate from 48V input to 65V output. but I notice some bumps in the output voltage. Zoomed in…
Part Number: UC3845 Tool/software: Dear TI Expert,
We are designing dc -dc buck converter using UC3845.
Please help to design inductor for the following parameters.
1. Input Voltage Range - 30 to 72 Vdc.
2. NO load Output Voltage - 13.80Vdc…
Part Number: PMP21529 Other Parts Discussed in Thread: UCD3138 Tool/software: Can the output current of the PMP21529 4-switch buck-boost bi-directional DC-DC converter be controlled via I²C or SPI using an MCU, in both directions?
Part Number: TIDM-DC-DC-BUCK Hi, when i debug the TIDM-DC-DC-Buck code, after stepped through Tasks State-machine initialization, line 88, it goes back to line 85. Can you help me understand why?
I have modified a little bit on this code, but the original…
