Hi,
roman konzet said: The reader must support ISO15396 and be capable not only of reading these tags but also of writing specific pages onto them.
TRF7970A only supports the below listed standards, not ISO15396. However, It is possible to communicate…
Hi,
?? ? said: I want to redesign the antenna geometry (custom PCB loop) to improve 13.56 MHz NFC read range and reliability.
I need to understand the stock matching network on the BoosterPack (L, C, damping resistor) and how it interfaces with…
Part Number: TRF7970A Tool/software: I'm using this NFC reader and here there all the documents . It is based on TI TRF7970A transceiver. Without issuing any command it works in freerun mode, reading out any NFC tag in the nearby. But it uses the internal…
Part Number: TRF7970A Tool/software: Hello,
I’ve been working on developing a library for NFC-A (Type 2 Tag) read/write mode using the TRF7970A IC, but I’m getting a bit lost with the sequence of direct commands that need to be sent in order to transmit…
Hi Benjamin,
Although I don't understand how the Felica polling works myself, I find this presentation about Felica support for TRF devices. Hope it is usefully to you.
/cfs-file/__key/communityserver-discussions-components-files/667/NFC-Forum-Type…
Hi,
Please refer to the app note NFC/HF RFID reader/writer using the TRF7970A (Rev. B) and download the corresponding software collateral from https://www.ti.com/tool/download/SLOC297 . The software collateral was developed for the MSP430 host MCU.…
Hi,
I suppose you are referring to the custom write single command, right?
sachin Amingad said: Is it possible the tag has vendor-customized firmware restricting 0xC1 ?
Is there a way to verify if write/FRAM/RAM access is locked or protected…
Hi Luke,
I think I will recall my earlier answer. While the RF430CL331H ds (which is a PICC) does not explain how modulation depth is define, I find the TRF7970A (a PCD) transceiver to have the below notes about the depth.
6.15.3.2.8 Modulator and…
Hi,
Please follow section 5 in the RF430FRL152HEVM User's Guide for the jumper configuration in order to run the SensorHub demo. In order to run the demo, you would need to:
- Change the jumper setting on the EVM as described in the User's Guide.…
Part Number: TIDM-DYNAMICNFCTAG Other Parts Discussed in Thread: TRF7970A
Hi Team,
Good day, we received inquiry from customer and want to know some information about TIDM-DYNAMICNFCTAG. For me to not miss any information, Ill copy the query below…
