Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed from November 25 through December 2. Thank you for your patience.
Other Parts Discussed in Thread: ADS1258 , TIPD151 Hello
For some mobile application , i should change this reference design according to this specs :
- embedded system with storing capabilities .
- 8 channel differential input at 30KHZ frequency .
- 24…
Part Number: MUX36D04 Other Parts Discussed in Thread: TIPD151 , OPA192 Hi expert,
In TI reference design TIPD151, there are OPA192 working as buffer before MUX36D04.
I'm wondering could I remove OPA192 and directly use MUX36D04 to measure Li-ion battery…
Part Number: ADS8681 Other Parts Discussed in Thread: ADS8861 , ADS8860 , TIPD151 Hello,
Are there any device without LPF Is there a device that removed the LPF from the ADS8681? 16bit, +/-10V input, 1MSPS , SPI I/F is required. Best Regards, Ryuji Asaka
Noam,
Thanks for clarifying your design intent, I wanted to make sure you were looking for an additional external MUX.
If you are looking to multiplex 4 differential analog inputs the MUX36D04 seems like a good device. This part is used in industrial…
Hello Reza,
The best way to ensure exact CCLK timing is to program the ADS8329 to run based on the external serial clock, SCLK. Please remember that the serial clock SCLK, is first reduced to 1/2 of its frequency before it is used as the conversion clock…
Thomas,
There are several families of switches you can look at for switching 5V and 10V low current signals.
What do you think about the MUXXXXX family of parts like the MUX36D04? There is a TI design with this mux in a data acquisition system.
The…
